Specifications

Page 6
M
Mode
Button
M
Mode
Button
M
Mode
Button
Down
Button
Up
Button
Down
Button
Up
Button
Down
Button
Up
Button
Holding the “mode M” button in for 2
seconds will save the new deep setting and
change the display back to the normal
depth mode. Set to zero to disable alarm.
Keel offset
Adjust depth sounder to measure depth
below keel or drive instead of sensor.
The display will show “K X.X” which is
the current setting for the keel offset.
Pressing the “Up” or “Down” buttons will
change the keel offset setting.
Holding the “mode M” button in for 2
seconds will save the new keel offset
setting and change the display back to the
normal depth mode. The Keel offset is
normally a negative number.
Units
Change the unit of measure.
The display will show “UNIT FT” for feet,
“UNIT FA” for fathoms, or “UNIT M” for
meters. Pressing the “Up” or “Down”
buttons will cycle through the choices.
Pressing and holding the “mode M” button
will save the units shown in the display
will save the units shown in the display
and change the display back to the normal
depth mode.
Down
Button
Up
Button
Meters
Fathoms
Feet (default)