Specifications

Page 10
LCD Alarm Condition Displays.
Alarm messages will be displayed on the
Tachometer LCD display. All messages will
be displayed until either the problem is
corrected or the operator manually cancels
the warning message.
Messages will display as a many screens
shown sequentially,
Canceling System Alarms
To manually cancel system warnings
messages, simultaneously press both the
“Up” and “Down” buttons on the
tachometer. This will disable the warning
message temporarily. If the problem is not
corrected in 1 minute (5 minutes for low
fuel), the warning will be displayed again.
The operator can cancel as often as
desired.
Down
Button
Up
Button
Figure 2
M
M
M
M
Tachometer Display Sequence
Quick
Press
Quick
Press
Quick
Press
Quick
Press
Hourmeter
Hours Remaining
M
Quick
Press
Engine Temperature
Oil Pressure
Voltmeter