Specifications

the console located to the right of the drivers knee or on the two raised

surfaces in the center of the dash pod.

CAUTION: The keypad and switch control box will be damaged beyond repair if

the boat battery cables or the main power leads to the keypad and switch

controlbox are reversed. Be sure to use caution and avoid reversing these

connections.

Keyless Ignition and Serial Switching

The ignition switch system is keyless and has three modes of operation.

Locked Mode

When the boat battery is first connected, the unit is in locked mode. In this

mode, the horn, bilge pump, bilge blower, and code buttons are operational.

Unlocked Mode

Unlocked mode is entered after the user successfully enters the user code,

presses, and releases the start button. When the code keys are pressed, the

system indicator light to the right of the start button will turn on while the

key is pressed down. This indicates the button has actually been pushed.

When the system is unlocked, power is supplied to the boat and the system

indicator light will turn on. At this point all keypad buttons are operational

and actuating these buttons will control the corresponding boat functions. To

put the unit back in locked mode, the user must successfully enter the user

code then

press the

stop button.

When the

code keys

are pressed,

the system

indicator

light to the

right of the

start button

will turn off

while the

keys are

pressed

down. Power will be cut to all of the accessories with the exception of the

horn, bilge pump, bilge blower and code buttons.

Run Mode

First enter the unlocked mode.

1.2

Keyless Ignition