Specifications

9.4
PCM WARRANTY TRANSFER APPLICATION
IMPORTANT! PURCHASER PLEASE NOTE: The checks listed below are
designed to insure the safety and satisfaction of you, the owner. Therefore, we
require that the following checks be performed at your expense by a qualified
technician prior to delivery. By signing the check list, the technician certifies
that he has checked the installation and operation of the engine and finds it to
be performing properly. The owner or his agent should perform similar
inspections periodically to identify any potential problems before they occur
and to have any suspected defects checked and corrected immediately.
PRE DELIVERY CHECK LIST
Technician: Please check off all points and sign below.
Check engine oil Check shaft alignment
Check timing Check drive lube
Check control adjustments Check exhaust hoses & clamps
Check battery charge Check control travel
Check alternator for charge and level Tighten all water lines
Tighten all drain plugs Check all lube points
Check belts for tension Set idle speed
Check for leaks, water, oil and exhaust Check prop size and rotation
Engine Model: _____________________________Engine Serial:________________
Trans. Serial: ______________________________# of Engine Hours:
Date sold to 1st owner: __________________________________________________
Date sold to 2nd owner: _________________________________________________
I hereby certify that I have completed the pre-delivery checklist on engine
# ________________________________________ and I have corrected any
discrepancies or inconsistencies revealed by these checks. ___________
Technician’s signature ______________________________________Date: _______
Company Name _______________________________________________________
Purchaser’s signature _______________________________________Date : _______
9.4
PCM WARRANTY TRANSFER APPLICATION
IMPORTANT! PURCHASER PLEASE NOTE: The checks listed below are
designed to insure the safety and satisfaction of you, the owner. Therefore, we
require that the following checks be performed at your expense by a qualified
technician prior to delivery. By signing the check list, the technician certifies
that he has checked the installation and operation of the engine and finds it to
be performing properly. The owner or his agent should perform similar
inspections periodically to identify any potential problems before they occur
and to have any suspected defects checked and corrected immediately.
PRE DELIVERY CHECK LIST
Technician: Please check off all points and sign below.
Check engine oil Check shaft alignment
Check timing Check drive lube
Check control adjustments Check exhaust hoses & clamps
Check battery charge Check control travel
Check alternator for charge and level Tighten all water lines
Tighten all drain plugs Check all lube points
Check belts for tension Set idle speed
Check for leaks, water, oil and exhaust Check prop size and rotation
Engine Model: _____________________________Engine Serial:________________
Trans. Serial: ______________________________# of Engine Hours:
Date sold to 1st owner: __________________________________________________
Date sold to 2nd owner: _________________________________________________
I hereby certify that I have completed the pre-delivery checklist on engine
# ________________________________________ and I have corrected any
discrepancies or inconsistencies revealed by these checks. ___________
Technician’s signature ______________________________________Date: _______
Company Name _______________________________________________________
Purchaser’s signature _______________________________________Date : _______