Owner`s manual

4-41
Switch (A) is shown in the ON position. Switch (B) is shown in the
OFF position.
NOTICE
The purpose of the battery selector switch is to keep one as a spare.
If both batteries are ON and one battery is used to start your
engine, and the other for accessories, both batteries will become
discharged. This will eliminate your spare and could leave you
stranded.
Make sure the battery connections stay clean and secure.
CORC053
Controls and Indicators
Air
Naut Air Sec 4_0804.qxd 11/22/04 8:35 AM Page 41