Owner`s manual

Air
10-3
The engine intake water strainer bowl (A) remains full of water
even after the rest of the engine cooling water system is drained. To
properly winterize your boat, the strainer bowl must be removed
and emptied. DO NOT lose the rubber O-ring (B) that seals the
bowl to the cap. Clean screen (C) if required. If the water is not
removed, the bowl can be damaged. A damaged strainer can cause
overheating problems during the next season.
CORC078
A
B
C
CORC067
OFF
ON
STRAINER
WATER
VALVE
Storage
Naut Air Sec 10_0804.qxd 11/22/04 8:32 AM Page 10-3