Installation & Assembly

ManualsBrandsCorrigan Studio ManualsCeiling LightsLedo 16-Light Sputnik Modern Linear LED Chandelier

Please consult your electrician for hanging fixture and wiring.

MADE IN CHINA

Page 1 of (4)

The fixture is designed to dim with a standard

Triac forward phase dimmer. Dimming levels

will vary by dimmer.

Below is a list of recommended dimmers:

Lutron

Leviton

Due to inrush current wattage should not

exceed 150 watts of product for a 600 watt

dimmer.

Warning!Wires need to be connected to driver

found in canopy and should not be connected

directly to power source or a short may occur.

Summary of content (4 pages)

PAGE 1
Please consult your electrician for hanging fixture and wiring. The fixture is designed to dim with a standard Triac forward phase dimmer. Dimming levels will vary by dimmer. Below is a list of recommended dimmers: Lutron Lutron Lutron Leviton Leviton Due to inrush current wattage should not exceed 150 watts of product for a 600 watt dimmer. Warning!Wires need to be connected to driver found in canopy and should not be connected directly to power source or a short may occur.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation (A) Mounting Bracket (I) Finial (J) (K) Locate all hardware & components before discarding packaging (E) 1.) (D) (C) (G) (H) (F) (B) (E) (I) (A) (D) Step.1: Run wire through stems and combine stem lengths to meet desired mounting height. (C) 1 2 (F) 2.) Step.2: (B) (K) 1 2 Using wire terminal block in the canopy, wire the low voltage red/black wire to the driver accordingly.
PAGE 3
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation (A) Mounting Bracket (I) Finial (J) (K) Locate all hardware & components before discarding packaging 4) Step.4: Wire fixture to wires in outlet box. Green wire is for Ground. Install fixture to bracket and tighten screws at the ends of the canopy to secure. (G) (H) (F) (E) (H) (I) (D) 5.) (I) Step.5: Install fixture to bracket and tighten ball nuts (I) on the canopy to secure.
PAGE 4
Acrylic Diffuser ＆ Glass K:16PCS J:16pcs MADE IN CHINA Page 4 of (4)