Installation & Assembly

IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Step. 3:
Cleaning & Care:
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
Page 2 of
(
2
)
Step.2:
Locate all hardware & components before discarding packaging
Step.1:
Remove mounting bracket(A) from fixture
and install to electrical box.
Wire fixture to wires in outlet box.
Green wire is for Ground.
Carefully remove body from fixture.Adjust cable
length to desired mounting height,and tighten
strain relief screws to secure.Install body(C) to
bracket(A) and tighten screws on the sides of the
canopy(B) to secure.Screw in GU10(D).