Assembly Instructions

Step 3
Place the Dining Chair on a Level Surface to check for wobbles. If it
wobbles, lift the Dining Chair some 30 to 50cm high from the
ground, keep your feet and toes well away from the drop zone, and
drop the Dining Chair freely and vertically with all four legs, hitting
the ground at the same time.
This Drop Test will help to ensure that all Bolts and gaps reach full
alignment.
Test again for evenness on a Level Surface.
If no wobbles are found, proceed to tighten all the Bolts.
When tightening the Bolts, tighten sequentially.
Do not tighten any Bolt fully and then move on towards the next
one, this would cause the frame to warp. If there are still
wobbles, loosen the Bolts and execute this same drop test.
If the Dining Chair is not Stable it could lead to damage to the
product.
If wobble
Test again
30cm - 50cm
Page 5 OF 7