Installation Instructions

Fig.2
FIXTURE
WIRES
BLACKOR
SMOOTH
FIXTURE
WIRES
WHITEOR
RIBBED
FIXTURE
WIRES
GREENOR
BARE
COPPER
(GROUND)
HOUSE
WIRES
BLACK
(HOT)
HOUSE
WIRES
WHITE
(NEUTRAL)
HOUSE
WIRES
GREENOR
BARECOPPER
(GROUND)
Page 2/2
C
US
LED module replace(Fig.3)
Shut
off power before replacing
1:There have ten lamp heads (H) with LED module ,if one
of them does no work , replace the complete no work one
from the canopy as shown in Fig. 3.Make sure the power
is off before you replace ;
For LED Pendant
ceiling as shown in Fig.1,return power to the junction box
ceiling carefully;
4:Remove the "8" buckle (N) and take off the cable wire from
the hole of the canopy (F). Save these parts for
subsequent service.
cables.
Fig.3
K
J
N
L
L
H
N
G
3:Broken the insulating tape (J),disconnect the wire
nut (K), cut the PC tie (L),cut a short section of cable
wire if necessary ,be careful not to damage the other
insulation jacket of the inner wire when stripping bare
strands of 1/2''.
INSTALLATION INSTRUCTIONS