Owner Manual

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware

contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 15 minutes.

PLEASE USE ON/OFF TYPE"A" BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT,

THERE IS LED 9-WATT BULB IN THE BOX .

Step 1 Step2 Step3

Make sure all parts could be aligned before assemble Put the shade (F) on the socket (E), Put the light on a level surface to check

Do not rotate lamp body too hard avoid base screw broken then tighten the Socket ring (G) . if everything is stable.

Insert Lamp body (C4) into Lamp body (C3) and secure with

screw

Insert the bulb (H) into the socket (E).

(Small wrench (D) included)

Screw the Lamp body (C3) onto the Lamp body (C2)

Screw the Lamp body (C2) onto the Lamp body (C1)

Insert the nipple of the Lamp body (C1) into Lamp base (B) and

secure with a metal washer and a nut from the bottom of Lamp Base

(Large wrench (A) included)

Be careful not to twist the power cord and tighten securely

ENJOY YOUR LAMP