ASSEMBLY INSTRUCTIONS TOOLS REQUIRED J Phillips Screwdriver {Not Included) Persons Recommended 000° EASY wo DHE DIFFICULT The Assembly Rating is a G-point system showing the faced of effort needed to assemble a specific product.
CHECK BEFORE STARTING Are you missing anything? Bauble-check ail parts, hardware and accessories listed on Page 8 are accounted for. Should we send any replacements? Are there any irregularities or flaws in the parts? We can send replacements! Check out our Quick Tips! We recommend reviewing the per-assembly handouts. Even experts need a refresher now and then! Prep Time! Please review the assembly instructions and all diagrams prior lo assembling.
PRE ASSEMBLY INTRODUCTION We understand building ready-to-assemble furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process. Teamwork ALWAYS have at gastric two people to help with transporting and assembling the product to avoid potential injury and/or damage. O Pre Suitable Location Cpe Assembling near the area of the intended location is highly recommended.
ASSEMBLY AND CARE ADVICE FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. Tum clockwise to tighten and only tighten when step is completed or when instructed Position each part correctly and insert screws or bolls into their respective holes. to do so. Use the appropriate hand tools or power tools for assembly. Elect steps, such as tightening screws and/or bolts, may require hand tools to avoid causing % gn damage during assembly.
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS Note : Ty Every cam lock bolt must have a cam % lock connector in order to fasten the parts together. cam bolt cam lock screwdriver Sower the cam insert the cam bolt into the bolt into panel, bolt hole of joint panel. Align the cam lock with its side opening Tum the cam jock clockwise gently (or arrow) pointing to cam bolt.
ASSEMBLY INSTRUCTIONS 2 Hardware (8) PCs i Sy A gil ~ Apply & dab of glue @ rd = into dowel holes of oF panels before inserting dowels 9/186
ASSEMBLY INSTRUCTIONS 3 The front facing of all panels are all finished. Part 3 x1PC Part @ x1PC Part § x1PC Part 8) PCs Part § PCs Hardware (4) PCs Hardware (5) PCs Accessory x1PC Part @ x1PC Front T Hardware (2) PCs [| o® Accessory (A3) PCs Please refer to page 5 for detailed instructions on how to fast Use the provided stickers rd #A3 16 cover exposed Ho | Sock. \.
ASSEMBLY INSTRUCTIONS 11 Fro nt Accessory (AT) PCs Tops, Lew Part §§ PCs Top Hardware (8) PCs affront Insert shelf pins (#65) to the holes of the desired shelf height.
ASSEMBLY INSTRUCTIONS 13 Part @ PCs Part ) PCs Top “a Front 14 Hardware (7) PCs Hardware (8) xBPCS through the thin lined gaps between back and side panels, then secure by using screws Insert fixative plates (47) [No per-diriiad holes | ee X8 15/18
ASSEMBLY INSTRUCTIONS © Keep this handy! Please rental this instruction manual and any order related information for future reference.
