Assembly Instructions

Assembly Notes:
During assembly, hand tighten screws only. When all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
WEIGHT CAPACITY: 250 lbs.
Parts Listing
STOP
Assembly Instructions
Tools Needed: Allen Wrench (provided)
Please read all instructions before assembly.
Step 1：Use Allen Wrench (E) to tighten 2 Legs (B) to Front Screw holes
in Seat (A) with 6 Screws and washers (D).
Step 2：Use Allen Wrench (E) to tighten 2 Legs (C) to Back Screw holes
in Seat (A) with 6 Screws and washers (D).
A B
C D
E
21
3`
4
Step 3：The Assmebly of the Chair is finished.Tighten All Screws on previous steps
with Allen Wrench (H).
Step 4：
x2
x2
(M6*20MM)
x12
B
A
D
C
D
FRONT LEGS
(SHARP SHAPE)
REAR LEGS
(TRAPEZOID SHARP)
Place chair on a flat level surface to ensure it is level. If the Chair is uneven,
slightly pressing the uneven legs and the diagonal legs to make it level.
Fabric Arm Chair 2PK