Assembly Instructions Caution: You must read this before you proceed Club Chair Part List Label Picture Description QTY A Right Armrest 1 B Left Armrest 1 C Seat Panel 1 D Backrest 1 E Seat Cushion 1 F Back Cushion 1 Page 1 OF 6
Hardware Label Picture Description QTY ① Bolt (M6*35mm) 9 ② Bolt (M6*65mm) 5 ③ Allen Key 1 ④ Cap 13 ⑤ Washer 13 Assembly Preparation Before Beginning Assembly: Page 2 OF 6
Assembly Steps Overview Back Cushion (F) Left Armrest (B) Bacrest (D) Right Armrest (A) Seat Cushion (E) Seat Panel(C) FRONT FACING This Club Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the side Club Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 3 Attach Seat Panel(C) to Right Armrest(A) using Bolts(①) and Washers(⑤) with Allen Key(③). Do not fully tighten the Bolts. Step 4 Attach Backrest(D) to Left Armrest(B) and Right Armrest(A) using Bolts(②) and Washers(⑤) with Allen Key(③). Do not fully tighten the Bolts. Step 5 Place the Club Chair on a LEVEL SURFACE to see if it wobbles. If it wobbles, lift the Club Chair some 30cm to 50cm high from the ground. Keep your feet and toes well away from the drop zone.
Step 6 Cover the Bolts with Caps(④) after tightening. Step 7 Cover the Bolts with Caps(④) after tightening. Step 8 Adjust height for balance Adjust low for balance At this point, ensure all bolts and nuts are fully tightened and secured. Then, with the assistance of your adult partner, proceed to turn and stand the Loveseat upright. Adjust the Legs Pre-installed Levellers until the Loveseat is level with the ground.
Step 9 F E Place the Seat Cushion(E) and Back Cushion(F) on the Club Chair. Your Club Chair is ready for use. This Club Chair can only be used on a flat, level surface. Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
Assembly Instructions Caution: You must read this before you proceed Loveseat Part List Label Picture Description QTY A Right Armrest 1 B Left Armrest 1 G Seat Panel 1 H Backrest 1 I Seat Cushion 1 F Back Cushion 2 Page 1 OF 6
Hardware Label Picture Description QTY ① Bolt (M6*35mm) 9 ② Bolt (M6*65mm) 5 ③ Allen Key 1 ④ Cap 13 ⑤ Washer 13 Assembly Preparation Before Beginning Assembly: Page 2 OF 6
Assembly Steps Overview Back Cushion (F) Backrest (H) Left Armrest (B) Right Armrest (A) Seat Cushion (I) Seat Panel (G) FRONT FACING This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Loveseat parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 3 Attach Seat Panel(G) to Right Armrest(A) using Bolts(①) and Washers(⑤) with Allen Key(③). Do not fully tighten the Bolts. Step 4 Attach Backrest(H) to Left Armrest(B) and Right Armrest(A) using Bolts(②) and Washers(⑤) with Allen Key(③). Do not fully tighten the Bolts. Step 5 Place the Loveseat on a LEVEL SURFACE to see if it wobbles. If it wobbles, lift the Loveseat some 30cm to 50cm high from the ground. Keep your feet and toes well away from the drop zone.
Step 6 Cover the Bolts with Caps(④) after tightening. Step 6 Cover the Bolts with Caps(④) after tightening. Step 7 At this point, ensure all bolts and nuts are fully tightened and secured. Then, with the assistance of your adult partner, proceed to turn and stand the Loveseat upright. Adjust the Legs Pre-installed Levellers until the Loveseat is level with the ground. To adjust the Levellers, with the assistance of your adult partner, tilt the Loveseat to rest on the 2 feets.
Step 8 F I Place the Seat Cushion(I) and Back Cushions(F) on the Loveseat. Your Loveseat is ready for use. This Loveseat can only be used on a flat, level surface. Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
Assembly Instructions Caution: You must read this before you proceed Coffee Table Part List Label Picture Description QTY J Table Top 1 K Leg 4 Description QTY ⑥ Bolt (M6*20mm) 17 ③ Allen Key 1 ④ Cap 17 ⑤ Washer 17 Hardware Label Picture Page 1 OF 5
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Table Top (J) Leg (K) Leg (K) FRONT FACING This Coffee Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Coffee Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface.
Step 2 Place the Table Top(J) facedown upon the clean, non-marring surface. Attach one Leg(K) to Table Top(J) using Bolts(⑥) and Washers(⑤) with Allen Key(③). Do not fully tighten the Bolts. Repeat the same process with the remaining three Legs. Step 3 Place the Coffee Table on a LEVEL SURFACE to see if it wobbles. If it wobbles, lift the Coffee Table some 30cm to 50cm high from the ground. Keep your feet and toes well away from the drop zone.
Step 4 Cover the Bolts with Caps(④) after tightening. Step 5 Adjust height for Adjust low for balance At this point, ensure all bolts and nuts are fully tightened and secured. Then, with the assistance of your adult partner, proceed to turn and stand the Chair upright. Adjust the Legs Pre-installed Levellers until the Table is level with the ground. To adjust the Levellers, with the assistance of your adult partner, tilt the Table to rest on the 2 feets.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
