Installation & Assembly

Step 5: Install the Legs (Sofa)
4 LEGS
12 LEG BOLTS
You’ll Need:
Start by aligning the leg over the mounting holes.
Insert bolts into corresponding threaded holes as
shown and tighten by hand.
Note: if you have flared legs, make sure that each
leg points outward toward its respective corner.
Once each bolt is started by hand, use the drill
to finish securing the leg.
Repeat for all four legs.
Note: Our legs are universal, and are used across
multiple products. All sofa and ottoman legs will
attach securely with 3 fasteners per leg.