WARNING!! Furniture Tipping Risk. Serious risk of severe or fatal crush injuries can occur from furniture tipping over if not secured. Children like to climb on furniture and Unsecured furniture can pose a serious danger. Please follow all instructions and install the tip-over restraints provided. In addition to installing the restraints, to help prevent tip-over: 1. Place heaviest items in the lowest drawers; 2.
Cabinet Label Picture Description QTY A Left Side Panel 1 B Shelf Panel 2 C Right Side Panel 1 D Top Panel 1 E Back Panel 1 Page 2 OF 14
F Bottom Panel 1 G Front Support Bar 1 H Back Support Bar 1 I Left Support Bar 1 J Right Support Bar 1 K Leg 4 L Drawer Front Panel 2 M Drawer Left Side Panel 2 N Drawer Right Side Panel 2 O Drawer Back Panel 2 P Drawer Base Panel 2 Page 3 OF 14
Label Picture Description QTY ① Cam Bolt 13 ② Dowel (M6x30mm) 25 ③ Cam Nut 13 ④ Screw (M3x12mm) 13 ⑤ Screw (M3x25mm) 16 ⑥ Screw (M4x15mm) 25 ⑦ Handle 2 ⑧ Metal Plate 4 ⑨ Plastic Drawer Slide 4 ⑩ Drawer Stopper 4 ⑪ Corner Support 4 ⑫ Screw (M4x25mm) 9 ⑬ Screw (M6x40mm) 9 ⑭ Screw (M4x35mm) 9 Page 4 OF 14
Screwdriver(Not provided) 1 ⑯ Restraint Strap 1 ⑰ Wall Anchor 1 ⑱ Screw (M3x12mm) 2 ⑲ Screw (M4x35mm) 2 ⑳ Hammer (Not Provided) 1 ㉑ Power Drill (Not Provided) 1 ⑮ Restraint Device Hardware Before Beginning Assembly: Page 5 OF 14
Overview Top Panel(D) Left Side Panel(A) Shelf Panel(B) Right Side Panel(C) Drawer Front Panel(L) Leg(K) FRONT FACING This Cabinet has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Cabinet parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 2.1) Insert Cam Bolt (①) into the mounting positions on Left Side Panel(A) using Screwdriver (⑮) as shown. Attach Plastic Drawer Slide(⑨) to the Left Side Panel(A) using Screw(④) with Screwdriver(⑮). 2.2) Insert Cam Bolt(①) into the mounting positions on Right Side Panel(C) using Screwdriver(⑮) as shown. Attach Plastic Drawer Slide(⑨) to the Right Side Panel(C) using Screw(④) with Screwdriver(⑮).
Step 3 3.1)Insert Dowel(②) into the mounting positions on Left Side Panel(A) and Shelf Panel(B), Attach Shelf Panel(B) to the Left Side Panel(A) using Cam Nut(③) with Screwdriver(⑮). 3.2)Insert Dowel(②) into the mounting positions on Right Side Panel(C) and Shelf Panel(B), Attach Shelf Panel(B) to the Right Side Panel(C) using Cam Nut(③)with Screwdriver(⑮). Step 4 4.1 4.
4.1) Insert Cam Bolt(①) into the mounting positions on Top Panel(D) using Screwdriver(⑮) as shown. 4.2) Insert Dowel(②) into Left Side Panel(A) and Right Side Panel(C), Attach Top Panel(D) to the Left Side Panel(A) and Right Side Panel(C) using Cam Nut(③) with Screwdriver(⑮), insert Back Panel(E) into the grooves on Left Side Panel(A) and Right Side Panel(C). Step 5 5.2 5.1 H H J J ⑮ 5.
Attach Bottom Panel(F) to the Left Side Panel(A) and Right Side Panel(C) using Dowel(②) andScrew(⑫) with Screwdriver(⑮). Step 7 Attach four Legs(K) to the Front Support Bar(G), Back Support Bar(H), Left Support Bar(I) and Right Support Bar(J) using Screw(⑬) with Screwdriver(⑮). Step 8 ⑮ x2 x2 8.1) Attach Drawer Left Side Panel(M) and Drawer Right Side Panel(N) to the Drawer Back Panel(O) using Screw(⑤) with Screwdriver(⑮). 8.
Step 9 ⑮ x2 Attach Handle(⑦) to the Drawer Front Panel(L) using Screw(⑫) with Screwdriver(⑮). Attach Drawer Front Panel(L) to the Drawer Left Side Panel(M) and Drawer Right Side Panel(N) using Screw(⑤) with Screwdriver(⑮). Step 10 E Attach Corner Support(⑪) to the Back Panel(E) using Screw(④) with Screwdriver(⑮).
Step 11 ⑬ Attach Drawer Stopper(⑩) to the Drawer Left Side Panel(M) and Drawer Right Side Panel(N), then Carefully insert the drawer into the Cabinet along the Runners and Runner Tracks. ！ WARNING Serious or fatal crushing injuries can occur from tipping furniture. To help prevent tip-over: ALWAYS secure this furniture to the wall using Cabinet Restraint Device. See product instructions for more ways to help prevent furniture tip-over.
Usage For Cabinet Restraint Device： Step 12 Attach Restraint Strap(⑯) to the Top Panel (D) using Screw(⑱) with Screwdriver(⑮). Step 13 ⑰ ⑳ Drill one mounting position on the wall with Power Drill(㉑), insert Wall Anchor(⑰) into drilled mounting position on the wall with Hammer(⑳). Move the cabinet back to the wall, lock by Screws(⑲) with Screwdriver(⑮).
Page 14 OF 14
