Assembly Instructions P.
General Assembly Guidelines . Ensure that all parts and hardware are available before beginning assembly. . Follow each step carefully to ensure the proper assembly of this product. . Two people are recommended for ease in the assembly of this product. V. V. The three main types of hardware used to assemble this product are : wood dowels , screws and bolts. The provided glue is to secure wood dowels in place .
Parts List 1 2 5 5 4 6 3 9 13 10 13 11 11 7 12 8 P.
Hardware List A Ø8x30mm Wooden dowel 6 pcs B Ø6x35mm Cam bolt 4 pcs C Ø15x11mm Cam lock 4 pcs D Ø30mm Sticker 4 pcs E Ø6x50mm Screw 4 pcs Shelf support pin 4 pcs F G Ø5x12mm Screw 4 pcs H Ø6x25mm Bolt 8 pcs J Ø4x45mm Screw 3 pcs Plastic wedge 6 pcs K L Ø3x17mm Screw 6 pcs M M4 Hex Key 1 pc Europe hinge 4 pcs Screw 24 pcs Q Velcro strap 1 pc R Nut 1 pc N P Ø3.
Step 1 A A A A 3 4 A 2 A Insert wooden dowel (A) into parts (2,3,4) as per diagram. P.
Step 2 B B B 1 B J J J 1 2 Secure cam bolt (B) into part (1), then using screw (J) attach part (2) to part (1) with Philips head screwdriver as per diagram. P.
1 Step 3 2 3 4 C C 1 Using cam lock(C) secure part (4) to part (1) with Philips head screwdriver as per diagram. P.
1 Step 4 2 3 3 C C 1 Using cam lock(C) secure part (3) to part (1) with Philips head screwdriver as per diagram. P.
Step 5 5 5 Put part (5) as per diagram. P.
Step 6 6 Put part (6) as per diagram. P.
Step 7 11 H 12 13 H 11 H H M H Using bolt (H) attach part (13) to parts (11,12) with hex key (M) as per diagram. P.
Step 8 H M 11 H 12 13 H 11 H H M H Using bolt (H) attach part (13) into parts (11,12) with Hex key (M) as per diagram. P.
Step 9 11 G 10 G 11 G Using screw (G) attach part (11) to part (10) with Philips head screwdriver. P.
Step 10 E M 3 13 E 4 E E M 13 Using screw (E) attach part (13) into parts (3,4) with hex key (M) as per diagram. P.
Step 11 D D Place sticker (D) cover the holes as per diagram . P.
Step 12 K 5 5 L K Using screw (L) fix plastic wedge (K) to back panel with Philips head screwdriver as per diagram. P.
Step 13 F 4 3 F F F F 9 F Insert shelf support pin (F) into parts (3,4) as per diagram. Make sure you pace the four shelf support pins in the same level .So the shelf is not tilted . Tilt and rest shelf .Put part (9) on the shelf support pins as per diagram. P.
Step 14 N N P P 7 8 N N P P Using screw (P) attach Europe hinge (N) into parts (7,8) with Philips head screwdriver as per diagram. P.
Step 15 N P 7 4 N P P N Using screw (P) attach Europe hinge (N) into part (4) with Philips head screwdriver as per diagram. P.
Step 16 N P 8 3 N P P N Using screw (P) attach Europe hinge (N) into part (3) with Philips head screwdriver as per diagram. Open and close the doors .If necessary ,adjust the screws for a good fit . P.
Step 17 1 Q T Using screw (T) attach Velcro strap (Q) into part (1) with Philips head screwdriver as per diagram. P.
1 Step 18 2 3 WARNING Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors. Wall R S Q Using screw (S) attach Velcro strap (Q) into Nut (R) to wall with Philips head screwdriver as per diagram. P.
Step 19 Final Assembly P.
