Assembly Instructions

ManualsBrandsCorrigan Studio Manuals5-6 Person Patio Conversation SetsNoriko 4 Piece Rattan Sectional Seating Group with Cushions

Caution: You must read this before you proceed

Caution: This Chair is NOT a TOY.

Keep your child / children at bay in the process of assembly.

Whenever moving or lifting

the Chair and to prevent damage to the Chair, two adults may be

needed to execute these actions.

Page 1 of 6

Corner Chair

Please look in the Table Top for hardware packs.

Summary of content (6 pages)

PAGE 1
Assembly Instructions Caution: You must read this before you proceed Please look in the Table Top for hardware packs. Corner Chair Caution: This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly. Whenever moving or lifting the Chair and to prevent damage to the Chair, two adults may be needed to execute these actions.
PAGE 2
Parts List Label Picture Description QTY A Seat Panel 1 B Backrest Panel 1 C Left Leg Panel 1 D Right Leg Panel 1 E Seat Cushion 1 F Back Cushion 1 Description QTY Bolt (M6x40mm) 13 Hardware Label ① ② ③ ④ Picture Sleeve Nut (M6x15mm) Washer (M6.
PAGE 3
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Back Cushion (E) Backrest Panel (B) Seat Cushion (D) Seat Panel (A) Right Leg Panel (D) Leg Panel Left (C) FRONT FACING This Corner Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Corner Chair parts, the above picture is to help you put the various parts into perspective.
PAGE 4
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 With assistance from your adult partners, turn the Seat Panel(A) facedown as pictured above. Attach Right Leg Panel(D) into the housing on the Seat Panel(A) then secure by using Bolts(①), and Washers(③) with Allen Key(④ ) as shown above. Do not fully tighten the Bolts. Step 3 Insert the Left Leg Panel(C) into the housing on the Seat Panel(A) then secure by using Bolts(①), and Washers(③) with Allen Key(④) as shown above.
PAGE 5
Step 4 With assistance from your adult partners, turn the Chair stand up as pictured above. Attach the Backrest Panel(B) to the Seat Panel(A) then secure by using the secure by using Bolts(①), and Sleeve Nut(②) with Allen Key(④) as shown above. Place the Chair on a flat, level surface. Carefully sit, onto the Chair. This pressure will help the Legs and Seat panel reach full alignment at all joints. Check for wobbles. In a sequential manner, gradually tighten all Bolts until evenly secured.
PAGE 6
Step 6 Note: This is an optional step in case you want to connect the Corner Chair and Loveseats. It should be done before securing Cushions. With assistance from your adult partners, rotate the latches onto the pre-fixed clips to connect the items together.