Assembly Instructions

Step 4
Step 5
With assistance from your adult partners, turn the Chair stand up as pictured above.
Attach the Backrest Panel(B) to the Seat Panel(A) then secure by using the secure by using
Bolts(①), and Sleeve Nut(②) with Allen Key(④) as shown above.
Place the Chair on a flat, level surface.
Carefully sit, onto the Chair.
This pressure will help the Legs and Seat panel reach full alignment at all joints.
Check for wobbles.
In a sequential manner, gradually tighten all Bolts until evenly secured.
Inspect the Chair and make sure all parts are adequately connected.
Place Seat Cushion(D), and Back Cushion(E) onto the chair as pictured.
Secure the velcro straps as shown in the diagrams.
Your Corner Chair is ready for use.
This Corner Chair can only be used on a flat, level surface.
Page 5 of 6