Assembly Instructions

ManualsBrandsCorrigan Studio Manuals5-6 Person Patio Conversation SetsNoriko 4 Piece Rattan Sectional Seating Group with Cushions

Caution: You must read this before you proceed

CAUTION: This Loveseat is NOT a TOY.

Keep your child / children at bay during the assembly process.

Whenever lifting or moving the Loveseat and to prevent damage to

the Loveseat, two adults may be needed to execute these actions.

LOVESEAT - LEFT

Please look in the Seat Panel for hardware packs.

Summary of content (6 pages)

PAGE 1
Assembly Instructions Caution: You must read this before you proceed Please look in the Seat Panel for hardware packs. LOVESEAT - LEFT CAUTION: This Loveseat is NOT a TOY. Keep your child / children at bay during the assembly process. Whenever lifting or moving the Loveseat and to prevent damage to the Loveseat, two adults may be needed to execute these actions.
PAGE 2
Part List Label Picture Description QTY A Seat Panel 1 B Backrest Panel 1 C Leg Panel 2 D Seat Cushion 1 E Back Cushion 1 Description QTY Hardware Label ① ② Picture Bolt (M6x40mm) Sleeve Nut (M6x15mm) 15 7 ③ Washer (M6.
PAGE 3
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Back Cushion (E) Backrest Panel (B) Seat Panel (A) Leg Panel (C) Seat Cushion (D) FRONT FACING This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Loveseat parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
PAGE 4
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 Place Seat Panel(A) facedown on a clean, non-marring surface. Attach Leg Frame(C) to Seat Panel(A) using Bolts(①), Washers(③) with Allen Key(④). Do not fully tighten the Bolts. Step 3 With assistance from your adult partners,Turn up the Pre-assembled in step 2 Align Seat Panel(A) to Backrest Panel(B) as shown above. Then Attach Backrest Panel(B) to Seat Panel(A) using Bolts(①), Sleeve Nut(②), Washers(③) with Allen Key(④).
PAGE 5
Step 4 Inspect the Loveseat and make sure all parts are adequately connected. Carefully sit onto the Loveseat. This pressure will help align all parts at all joints. In a sequential manner, tighten all Bolts at all joints. Place Seat Cushion(D), Back Cushion(E) onto the Loveseat. Then affix the velcro straps around the Loveseat as shown above. The Loveseat is ready to be used. This Loveseat can only be used on a flat, level surface.
PAGE 6