Owner Manual

Pre-assembly:
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
WARNING:
Beware of Small parts and sharp edges.
Care Instructions
Lightly wipe or dust the surface with a dry soft cloth. Window cleaners, scrub cleaners, cleaning abrasives and alcohol
solvent could damage the protective coating and paint of the product.
Customer Service
Questions ragarding the product, please contact customer service and have the model number ready.
(A)x1
(B)x1
(C)x1Lx1R
(D)x1
(E)x10
(F)x2
(G)x4
(H)x1
(I)x8
1
2
3
4
5 6
Open the bottom cover, and then use the bolt (E) and
lock washer (F) loosely connect the seat cushion (B)
to the back cushion (A). Loosely tighten with an
Allen key (H).
H
E
B
A
F
H
E
C
A
B
C
A
B
D
E
H
C
D
E
H
E
H
G
I
G
Using bolt (E), connect left arm (C) to back cushion (A), tighten it
loosely with an Allen key (F).
Insert front stretcher (D) to left arm(C) with two located dowels.And
then using bolt (E), connect right arm (C) to back cushion (A).Loosely
tighten with an Allen key (H).
Attach right arm and left arm (C)to the front stretcher (D),
using bolts (E).
Attach the wool spacer to the bottom of the chair leg.
Use an Allen key (H) to make sure that all bolts are secured. Connect
the cork (I) to the bolt hole, and beat the cork to its tighten with a
rubber mallet. Note: Use a piece of cloth between the cork and the
edging to prevent damage to the surface of the cork. The assembly
is complete.