Assembly Instructions

Assembly Notes:
During assembly, hand tighten screws only. When all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
WEIGHT CAPACITY: 250 lbs.
Parts Listing
STOP
Assembly Instructions
Tools Needed: Allen Wrench (provided)
Please read all instructions before assembly.
A B
C D
E
G
21
3`
4
F
(M6*35MM)
x8
(M6*30MM)
x4
50%
50%
B
E
A
C
E
A
F
D
Step 1：Use Allen Wrench (G) to slightly tighten 2 Legs (B) to Front Screws holes
in Seat (A) with 4 Screws (E).
Step 2：Use Allen Wrench (G) to slightly tighten 2 Legs (C) to Rear Screws holes
in Seat (A) with 4 Screws (E).
Step 3：Use Allen Wrench (G) to tighten Footrest (D) to Legs (B) and Legs(C)
with 4 Screws (F).Please make sure the small holes on the Footrest (C)
facing floor after the chair is finished.
Step 4：The Assmebly of the stool is finished.Tighten All Screws in previous step
with Allen Wrench (G).
Place Stool on a flat level surface to ensure it is level. If the stool is uneven,
slightly pressing the uneven legs and the diagonal legs to make it level.
100
%
Fabric Counter Stool 2PK