Owners manual

ManualsBrandsCorsa Performance ManualsAutomotive14325 Sport Axle-Back Exhaust System Fits 14-17 CTS

IMPORTANT WARRANTY & INSTALLATION

INSTRUCTIONS ATTACHED

Please Forward All Attached Information to Consumer

Warranty Not Valid Unless Returned to CORSA Performance

We ask that you take a few moments to compete our warranty registration form:

TO ACTIVATE YOUR LIMITED LIFETIME WARRANTY GO TO:

CORSAPERFORMANCE.COM/WARRANTY

For Full-Color Installation Instructions, Please Visit:

CORSAPERFORMANCE.COM and Search by Part Number

Please be sure to review the enclosed instructions prior to beginning the installation process. If you

have any questions about the enclosed parts, instructions or encounter a problem during installation:

CALL CORSA PERFORMANCE TECHNICAL ASSISTANCE AT 800.486.0999

CORSA PERFORMANCE l 140 BLAZE INDUSTRIAL PKWY, BEREA, OHIO 44017

STOP

Summary of content (6 pages)

PAGE 1
IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED Please Forward All Attached Information to Consumer Warranty Not Valid Unless Returned to CORSA Performance We ask that you take a few moments to compete our warranty registration form: TO ACTIVATE YOUR LIMITED LIFETIME WARRANTY GO TO: CORSAPERFORMANCE.COM/WARRANTY STOP For Full-Color Installation Instructions, Please Visit: CORSAPERFORMANCE.
PAGE 2
Axle-Back Exhaust System 2014+ Cadillac CTS V-Sport 3.6L V6 Turbo PN: 14325 Please take time to read and understand these installation instructions. CORSA recommends that the installation of this system be performed by a qualified service center or professional muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to perform this install, the use of a lift and an additional person will be required. CAUTION: Never work on a hot exhaust system.
PAGE 3
Axle-Back Exhaust System 2014+ Cadillac CTS V-Sport 3.6L V6 Turbo PN: 14325 Factory Exhaust System Removal: 1. Beginning at the rear of the vehicle, remove the five (5) bolts on each side securing the splash guard to the heat shield using the 1/4” drive ratchet and 7mm socket. (Fig. A) The heat shield is riveted in place at the factory so it cannot be completely removed at this time. Removing the bolts on each side will allow the guard to flex enough to remove the factory exhaust. 2.
PAGE 4
Axle-Back Exhaust System 2014+ Cadillac CTS V-Sport 3.6L V6 Turbo PN: 14325 Factory Exhaust Removal Pictures Fig. A Fig. B Fig. D Fig. C Fig. E INS5288 10/22/2014 CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: (440) 891.0999 · F: (440) 891-1868 E - Ma il : s al es @c o rs a p er f orm a nc e .c om · www. c o rs a p e rf o rm a n ce .
PAGE 5
Axle-Back Exhaust System 2014+ Cadillac CTS V-Sport 3.6L V6 Turbo PN: 14325 Installation of CORSA Exhaust System: NOTE: Apply the anti-seize lubricant (supplied) to the threads ONLY of all the clamps and flange bolts. Failure to follow this procedure can cause nuts to seize on clamps and potentially destroy threads. After applying anti-seize lubricant, be sure to thoroughly clean your hands, as lubricant will tarnish stainless steel. All clamps should be tightened using a properly calibrated Torque Wrench.
PAGE 6
Axle-Back Exhaust System 2014+ Cadillac CTS V-Sport 3.6L V6 Turbo PN: 14325 CORSA Exhaust Installation Pictures Fig. A Fig. B Fig. C Fig. D Fig. F Fig. E INS5288 10/22/2014 CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: (440) 891.0999 · F: (440) 891-1868 E - Ma il : s al es @c o rs a p er f orm a nc e .c om · www. c o rs a p e rf o rm a n ce .