Owners manual

03/14/17
INS5344
CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: [phone] · F: [phone]
2
E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m
Axle Back Exhaust System
2016+ Cadillac CTS-V LT4
PN 14357/BLK & 14358/BLK
Please take time to read and understand these installation instructions.
CORSA recommends that the installation of this system be performed by a qualified service center or professional
muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to
perform this install, the use of a hoist and an additional person will be required.
NOTE: The installation of this Corsa Performance Exhaust system requires cutting and clamping onto the factory
system. Ensure measurements and cut locations are correct before cutting the factory exhaust system!
CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when
working under a vehicle.
Recommended Tools:
 3/8” drive ratchet
 3/8” drive 15mm deep socket
 Grommet pullers
 Soap and water solution
 Torque Wrench
 Chain cutters
 File or deburring tool
 Safety glasses
Please confirm that all parts are present before beginning the factory exhaust system removal and CORSA exhaust
system installation.
1. Passenger Rear Muffler Assembly
a. 15CV2098 – Xtreme
b. 15CV2102 – Sport
2. Driver Rear Muffler Assembly
a. 15CV2099 – Xtreme
b. 15CV2103 – Sport
3. Passenger Tip Assembly – 15CV3004
4. Driver Tip Assembly – 15CV3005
5. Driver Axle Pipe Assembly – 15CV4069
6. Passenger Axle Pipe Assembly – 15CV4070
7. Hardware Kit – 17CH7008