IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED Please Forward All Attached Information to Consumer Warranty Not Valid Unless Returned to CORSA Exhaust We ask that you take a few moments to complete our warranty registration form: TO ACTIVATE YOUR LIMITED LIFETIME WARRANTY GO TO: CORSAPERFORMANCE.COM/WARRANTY STOP For Full-Color Installation Instructions, Please Visit: CORSAPERFORMANCE.
Cat Back Exhaust System Installation 2011-14 Ford F-150 Raptor 6.2L Single Side Exit w/ Twin 4.0” Pro-Series Tips PN 14387, 14387BLK, 14760, 14760BLK Please take time to read and understand these installation instructions. CORSA recommends that the installation of this system be performed by a qualified service center or professional muffler installer who has the necessary equipment, tools and experienced personnel.
Cat Back Exhaust System Installation 2011-14 Ford F-150 Raptor 6.2L Single Side Exit w/ Twin 4.0” Pro-Series Tips PN 14387, 14387BLK, 14760, 14760BLK Recommended Tools for Resonator Delete Kit: 13mm deep socket 14mm deep socket 15mm deep socket Ratchet 14mm wrench Penetrating lubricant Safety glasses Torque wrench Removal of Stock System 1. Remove both bolts on the connecting flange of the resonator using a 13mm socket and ratchet. (See Fig A.) 2.
Cat Back Exhaust System Installation 2011-14 Ford F-150 Raptor 6.2L Single Side Exit w/ Twin 4.0” Pro-Series Tips PN 14387, 14387BLK, 14760, 14760BLK Installation of CORSA Exhaust System: NOTE: Apply the anti-seize lubricant (supplied) to the threads ONLY of all the clamps and flange bolts. Failure to follow this procedure can cause nuts to seize on clamps and potentially destroy threads. After applying anti-seize lubricant, be sure to thoroughly clean your hands, as lubricant will tarnish stainless steel.
Cat Back Exhaust System Installation 2011-14 Ford F-150 Raptor 6.2L Single Side Exit w/ Twin 4.0” Pro-Series Tips PN 14387, 14387BLK, 14760, 14760BLK Recommended Tools: • Safety Glasses • Grommet Pullers •13mm Socket •12" Ratchet Extension •15mm Socket • Soap & Water Solution • 3/8” Ratchet •10mm Socket • Torque Wrench Please confirm that all parts are present before beginning the factory exhaust system removal and CORSA exhaust system installation.
Cat Back Exhaust System Installation 2011-14 Ford F-150 Raptor 6.2L Single Side Exit w/ Twin 4.0” Pro-Series Tips PN 14387, 14387BLK, 14760, 14760BLK Removal of Stock System 1. Remove both bolts that secure the flange connection on the factory center pipe using a 13mm socket and ratchet. (See Fig. A) 2. Unbolt the muffler hanger mount from the chassis using a 10mm socket and ratchet. (See Fig. B) 3.
Cat Back Exhaust System Installation 2011-14 Ford F-150 Raptor 6.2L Single Side Exit w/ Twin 4.0” Pro-Series Tips PN 14387, 14387BLK, 14760, 14760BLK INS5193 02/10/2014 Fig A Fig B Fig C Fig D Fig E Fig F Fig G Fig H Fig I Fig J Fig K Fig L CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: (440) 891.0999 · F: (440) 891-1868 E - Ma il : s al es @c o rs a p er f orm a nc e .c om · www. c o rs a p e rf o rm a n ce .
Cat Back Exhaust System Installation 2011-14 Ford F-150 Raptor 6.2L Single Side Exit w/ Twin 4.0” Pro-Series Tips PN 14387, 14387BLK, 14760, 14760BLK Installation of CORSA Exhaust System: NOTE: The supplied double edge clamps in this system will crush and permanently deform the exhaust piping as they are tightened. DO NOT tighten these clamps any more than is necessary to lightly hold the exhaust components in place, until the very end of this installation process.
Cat Back Exhaust System Installation 2011-14 Ford F-150 Raptor 6.2L Single Side Exit w/ Twin 4.0” Pro-Series Tips PN 14387, 14387BLK, 14760, 14760BLK 7. Secure the muffler in place with the supplied clamp as shown, using a 15mm socket and ratchet, making sure to only tighten the clamp nuts just enough to hold the muffler onto the intermediate pipe. Note the position and orientation of the clamp. (See above clamp notes & See Fig.
Cat Back Exhaust System Installation 2011-14 Ford F-150 Raptor 6.2L Single Side Exit w/ Twin 4.0” Pro-Series Tips PN 14387, 14387BLK, 14760, 14760BLK INS5193 02/10/2014 Fig A Fig B Fig C Fig D Fig E Fig F Fig G Fig H Fig I Fig J Fig K Fig L CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: (440) 891.0999 · F: (440) 891-1868 E - Ma il : s al es @c o rs a p er f orm a nc e .c om · www. c o rs a p e rf o rm a n ce .
Cat Back Exhaust System Installation 2011-14 Ford F-150 Raptor 6.2L Single Side Exit w/ Twin 4.0” Pro-Series Tips PN 14387, 14387BLK, 14760, 14760BLK Fig M INS5193 02/10/2014 Fig N CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: (440) 891.0999 · F: (440) 891-1868 E - Ma il : s al es @c o rs a p er f orm a nc e .c om · www. c o rs a p e rf o rm a n ce .
