Owners manual

ManualsBrandsCorsa Performance ManualsAutomotive14405BLK Sport Cat-Back Exhaust System Fits 11-18 1500

IMPORTANT WARRANTY & INSTALLATION

INSTRUCTIONS ATTACHED

Please Forward All Attached Information to Consumer

Warranty Not Valid Unless Returned to CORSA Exhaust

We ask that you take a few moments to complete our warranty registration form:

TO ACTIVATE YOUR LIMITED LIFETIME WARRANTY GO TO:

CORSAPERFORMANCE.COM/WARRANTY

For Full-Color Installation Instructions, Please Visit:

CORSAPERFORMANCE.COM and Search by Part Number

Please be sure to review the enclosed instructions prior to beginning the installation process. If you

have any questions about the enclosed parts, instructions or encounter a problem during installation:

CALL CORSA PERFORMANCE TECHNICAL ASSISTANCE AT 800.486.0999

CORSA PERFORMANCE EXHAUST l 140 BLAZE INDUSTRIAL PKWY, BEREA, OHIO 44017

STOP

Summary of content (5 pages)

PAGE 1
IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED Please Forward All Attached Information to Consumer Warranty Not Valid Unless Returned to CORSA Exhaust We ask that you take a few moments to complete our warranty registration form: TO ACTIVATE YOUR LIMITED LIFETIME WARRANTY GO TO: CORSAPERFORMANCE.COM/WARRANTY STOP For Full-Color Installation Instructions, Please Visit: CORSAPERFORMANCE.
PAGE 2
Corsa Exhaust System Installation Cat Back Exhaust System 2009-2016 Dodge Ram 1500 D.U.B. PN 14405 and 14405BLK Please take time to read and understand these installation instructions. CORSA recommends that the installation of this system be performed by a qualified service center or professional muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to perform this install, the use of a hoist and an additional person will be required.
PAGE 3
Corsa Exhaust System Installation Cat Back Exhaust System 2009-2016 Dodge Ram 1500 D.U.B. PN 14405 and 14405BLK Removal of Stock Exhaust System: 1. Using a 15mm socket, loosen the factory clamps connecting the tailpipes to the muffler. (See Fig. A). Note: The use of a soapy water solution may aid in the removal and later installation of the hangers in the rubber isolators. 2. Using a grommet puller or similar device, remove the passenger tailpipe hanger.
PAGE 4
Corsa Exhaust System Installation Cat Back Exhaust System 2009-2016 Dodge Ram 1500 D.U.B. PN 14405 and 14405BLK Installation of CORSA Performance Exhaust System: NOTE: Apply the anti-seize lubricant (supplied) to the threads ONLY of all the clamps and flange bolts. Failure to follow this procedure can cause nuts to seize on clamps and potentially destroy threads. After applying anti-seize lubricant, be sure to thoroughly clean your hands, as lubricant will tarnish stainless steel.
PAGE 5
Corsa Exhaust System Installation Cat Back Exhaust System 2009-2016 Dodge Ram 1500 D.U.B. PN 14405 and 14405BLK 7. At this time, make all necessary adjustments at the clamp joints to align the tips and obtain proper clearances. Check clearance of exhaust system, hangers, frame, cables, hoses, etc. Check tip depth, height, and rotation. The tips should be centered in the factory bumper cutouts. (See Fig. V). 8.