Owners manual

Corsa Exhaust System Installation
Cat Back Exhaust System
2009-2016 Dodge Ram 1500 D.U.B.
PN 14405 and 14405BLK
INS5257
CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: [phone] · F: [phone]
2
E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m
3/14/2016
Please take time to read and understand these installation instructions.
CORSA recommends that the installation of this system be performed by a qualified service center or professional
muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to
perform this install, the use of a hoist and an additional person will be required.
CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when
working under a vehicle.
Recommended Tools:
 Safety Glasses
 15mm Socket
 3/8” Ratchet
 Grommet Pullers
 Torque Wrench
 Soap & Water Solution
Please confirm that all parts are present before beginning the factory exhaust system removal and CORSA
exhaust system installation.
Bill of Materials:
1 18DR2028 (Muffler Assembly)
2 18DR3007 (4.5” Pro Series Tip Assembly)(QTY of 2)
3 18DR4132 (Driver Axle Pipe Assembly)
4 18DR4134 (Driver Tail Pipe Assembly)
5 18DR4130 (Passenger Tail Pipe Assembly)
6 18DR7062 (Hardware Kit)