Owners manual

3/14/2016
INS5286
CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: [phone] · F: [phone]
2
E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m
Exhaust System Installation
Cat Back Exhaust System
Dual Rear Exit w/ 4.5” Pro-Series Tips
2011-2016 Dodge Durango 5.7L V8
PN 14459 and 14459BLK
Please take time to read and understand these installation instructions.
CORSA recommends that the installation of this system be performed by a qualified service center or professional
muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to
perform this install, the use of a hoist and an additional person will be required.
CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when
working under a vehicle.
Recommended Tools:
 3/8” drive ratchet
 3/8” drive torque wrench
 3/8” drive 13mm socket
 3/8” drive 14mm socket
 3/8” drive 15mm deep socket
 13mm wrench
 14mm wrench
 Grommet pullers
 Soap and water solution
 Torque Wrench
 Penetrating lubricant spray
 Safety glasses
Please confirm that all parts are present before beginning the factory exhaust system removal and CORSA exhaust
system installation.
Bill of Materials
1. 18DD2000 – Muffler Assembly – Passenger
2. 18DD2001 – Muffler Assembly – Driver
3. 18DD2009 – Tunnel Muffler Assembly – Driver
4. 18DD2010 – Tunnel Muffler Assembly – Passenger
5. 18DD3000 – Tip Assembly (2x)
6. 18DD4019 – X-Pipe Assembly
7. 18DD4026 – Axle Pipe (2x)