Owners manual

3/15/2017
INS5337
CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: [phone] · F: [phone]
2
E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m
3.0” Cat Back; SSE w/ Twin 4.0” Pro-Series Tips
Chevrolet Colorado/GMC Canyon 3.6L
128.3” & 140.5” Wheel Base
‘15-16 PN: 14744, 14744BLK
2017+ PN: 14745, 14745BLK
Please take time to read and understand these installation instructions.
CORSA recommends that the installation of this system be performed by a qualified service center or professional
muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to
perform this install, the use of a lift and an additional person will be required.
CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when
working under a vehicle.
Recommended Tools:
 3/8” drive ratchet
 3/8” drive 15mm deep socket
 Torque Wrench
 Safety glasses
 Grommet pullers
 Penetrating Lubricant
 Soap and water solution
Please confirm that all parts are present before beginning the factory exhaust system removal and CORSA exhaust
system installation.
Bill of Materials
1. 16CC2006 – Muffler Assembly
2. 16CC4008 – Head Pipe Assembly (2015-16)
16CC4038 – Head Pipe Assembly (2017)
3. 16CC4012 – Tail Pipe Assembly
4. 16CC4027 – 140.5” WB Adapter Pipe
5. 16TA3000 – Side Swept Tip Assembly
6. 18DR7033 – Hardware Kit