Owners manual

05/05/2014
INS5284
CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: [phone] · F: [phone]
11
E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m
Exhaust System Installation
Valve Back Exhaust System
2014-Current C7 Corvette
PN’s 14762, 14763, 14764, 14765
Polished & Black Quad 4.5” Pro or Poly Tips
IMPORTANT NOTE DO NOT over-tighten the clamps on the tip assembly, as this will make future removal of the
tip assembly much more difficult. The C7 CORSA tip assemblies are designed to be interchangeable, between the
different tip designs and finishes.
25. Tighten the muffler tie bracket hardware at this time using a 13mm wrench, along with a 13mm socket and 3/8”
ratchet. Torque to 15 Ft-Lbs. (Fig. NN) Installation complete.
NOTE: During cold weather start-ups, you may experience an exhaust sound that is deeper and louder in tone
than usual. This is temporary and will diminish to normal levels once your engine has reached its normal
operating temperature.
NOTE: Immediately following the installation of your exhaust system, you may experience a trace of smoke
after initial start-up. DO NOT be alarmed. The smoke is caused by the burning of a small amount of forming oil
residue used in the manufacturing process.
CORSA Exhaust Installation Pictures
INSTALL PICTURES CONTINUED ON NEXT PAGE
Fig. A
Fig. B
Fig. C
Fig. D