Owners manual

05/05/2014

INS5284

CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: (440) 891.0999 · F: (440) 891-1868

E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m

Exhaust System Installation

Valve Back Exhaust System

2014-Current C7 Corvette

PN’s 14762, 14763, 14764, 14765

Polished & Black Quad 4.5” Pro or Poly Tips

Please take time to read and understand these installation instructions.

CORSA recommends that the installation of this system be performed by a qualified service center or professional

muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to

perform this install, the use of a hoist and an additional person will be required.

NOTE: Installation of this system requires cutting and clamping onto the stock axle pipe section (just after the

factory AFM valve). The presence of the AFM valve is needed to achieve the acoustic target when AFM is active.

CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when

working under a vehicle.

Recommended Tools:

 3/8” drive ratchet and long extension (10”)

 3/8” drive 10mm deep socket

 3/8” drive 15mm deep socket

 3/8” drive 13mm deep socket

 8mm wrench

 13mm wrench

 1/4” drive ratchet

 1/4” drive 7mm shallow socket

 Tape measure & marker

 Saw or chain-style pipe cutter

 File or sanding device for deburring

 Grommet pullers

 Soap and water solution

 Torque Wrench

 Screwdriver for License Plate Screws

 Safety glasses

Please confirm that all parts are present before beginning the factory exhaust system removal and CORSA exhaust

system installation.

Muffler Section Bill of Materials

1. Passenger Muffler Assembly:

16CN2000 (Extreme – Used on 14762/14763)

16CN2010 (Sport – Used on 14764/14765)

2. Driver Muffler Assembly:

16CN2001 (Extreme – Used on 14762/14763)

16CN2011 (Sport – Used on 14764/14765)

3. 16CN4026 – Pass Clamp on Elbow Asm.

4. 16CN4027 – Driver Clamp on Elbow Asm.

5. 16CN7018 – Hardware Kit