Owners manual

ManualsBrandsCorsa Performance ManualsAutomotive616964-D Shielded Box Air Intake System Fits Grand Cherokee

CORSA PERFORMANCE EXHAUST l 140 BLAZE INDUSTRIAL PKWY, BEREA, OHIO 44017

IMPORTANT WARRANTY & INSTALLATION

INSTRUCTIONS ATTACHED

Please Forward All Attached Information to Consumer

Warranty Not Valid Unless Returned to CORSA Performance

We ask that you take a few moments to complete our warranty registration form:

TO ACTIVATE YOUR WARRANTY GO TO:

CORSAPERFORMANCE.COM/WARRANTY

For Full-Color Installation Instructions, Please Visit:

CORSAPERFORMANCE.COM and Search by Part Number

Please be sure to review the enclosed instructions prior to beginning the installation process. If you

have any questions about the enclosed parts, instructions or encounter a problem during installation:

CALL CORSA PERFORMANCE TECHNICAL ASSISTANCE AT 800.486.0999

STOP

Summary of content (4 pages)

PAGE 1
IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED Please Forward All Attached Information to Consumer Warranty Not Valid Unless Returned to CORSA Performance We ask that you take a few moments to complete our warranty registration form: TO ACTIVATE YOUR WARRANTY GO TO: CORSAPERFORMANCE.COM/WARRANTY STOP For Full-Color Installation Instructions, Please Visit: CORSAPERFORMANCE.COM and Search by Part Number Please be sure to review the enclosed instructions prior to beginning the installation process.
PAGE 2
Metal Shield Air Intake System 2011+ SRT Grand Cherokee 6.4L PN 616964-O/D Please take time to read and understand these installation instructions. CORSA recommends that the installation of this system be performed by a qualified service center or professional installer who has the necessary equipment, tools and experienced personnel. However, if you decide to perform this install the use of an additional person may be required. CAUTION: Never work on a hot engine bay. Allow time for the vehicle to cool.
PAGE 3
Metal Shield Air Intake System 2011+ SRT Grand Cherokee 6.4L PN 616964-O/D Installation Instructions: Locate your vehicle’s battery and disconnect the negative battery cable, this resets the computer and clears old air flow data to prevent CEL errors. 1. Before you begin the install you must disconnect the negative battery cable. Failure to disconnect the battery may cause a check engine light or damage your engine. (Fig A) 2.
PAGE 4
Metal Shield Air Intake System 2011+ SRT Grand Cherokee 6.4L PN 616964-O/D 19. Slide straight sleeve with two #56 clamps onto straight sleeve. Do not tighten at this time. (Fig S) 20. First slide duct into hump hose, next slide straight sleeve onto throttle body. Do not tighten at this time. (Fig T) 21. Tighten hardware used to hold bracket to heat shield. (Fig U) 22. Tighten the clamp on the throttle body and the filter adapter. (FIG V,W) 23.