User manual
113
CORSAIR GAMING RGB MOUSE SOFTWARE USER MANUAL
In order to configure mouse performance, you must
first select a profile and mode to work with�
In the Corsair Utility Engine, in the Profiles menu,
1� In the profile drop-down list, click the profile
you want to use�
2� In the mode list, click the mode you want to
use� If only one mode is defined, it is selected
by default�
3� In the right pane, click the Performance tab�
There are five DPI stages that can be specified per
mode� One of the DPI stages can be set to be the
default DPI stage for the mode�
• To set the default DPI stage for the mode,
beneath the DPI stage you want to use, click
Default�
By default, the DPI for the X and Y axis for all stages
are synced�
• If you want to specify independent values for
X and Y, select the Independent X-Y checkbox�
To configure the DPI for a DPI stage, either:
• Click and drag the DPI slider to the value you
want to use, or
CONFIGURING MOUSE
PERFORMANCE
• In the X field, type the value you want to use�
If you selected the Independent X-Y checkbox,
type values in both the X and the Y fields�
You can enable or disable individual DPI stages, so
that you can rotate through or skip DPI stages, as
needed� By default, all DPI stages are enabled�
• To disable a DPI stage, click the Enable button�
The button will no longer be highlighted� Click
Enable again to re-enable the DPI stage�
• You can also reset all the DPI stages to their
default values� Resetting the values will not
affect whether a DPI stage is enabled or
disabled�
• To reset all the DPI stages to their default
values, click Reset�
You can also change the motion speed of the
mouse pointer�
• To change the pointer’s motion speed, in the
Pointer Motion Speed section, click and drag
the slider to the position you want� You can
also select the Enhance pointer precision
checkbox to fine tune the positioning of the
mouse pointer�
• You can fine-tune the mouse’s lift height, to
enable sensitivity to the mouse being picked
up for repositioning during gaming�
MOUSE
PERFORMANCE
OPTIONS