User manual

53
CORSAIR GAMING RGB MOUSE SOFTWARE USER MANUAL
In the Corsair Utility Engine, in the Lighting menu,
1� Click New�
2� The Foreground Lighting Editor dialog box
appears� In the Name field, enter the name for
the lighting effect�
3� In the Notes field, enter any optional notes
you want to make about the lighting effect�
4� In the lighting grid, right-click, and then click
Add�
5� A color bar with two end markers appears in
the grid� You can change the color or resize
the color bar to change intensity and duration�
CREATING A SOLID
LIGHTING EFFECT
CHANGING A SOLID COLOR
1� In the lighting grid, right-click the color bar,
and then click Edit�
2� The Select Color dialog box appears� Select
the color you want to use, and then click OK�
CHANGING INTENSITY AND DURATION
1� To adjust the intensity of the lighting effect, in
the lighting grid, click and drag the color bar
vertically to raise or lower the intensity�
2� To adjust the duration, click and drag the start
marker or end marker to the time you want
Note: In the lighting grid, the X-axis represents
the percentage of the total duration specified
in the End field� For example, if the End field is
set to 10 seconds, and you have created a red
light that starts at the 4th mark on the X-axis
and goes to the 6th mark on the X-axis, when
the lighting effect activates, the red light will
start on the 4th second and last 2 seconds� If
you change the End field to 20 seconds, the
red light will start on the 8th second and last 4
seconds�
3� In the End field, type the number of seconds
you want the lighting effect to last� You can
set a maximum time of 99 seconds�
LIGHTING EFFECTS