User manual

55
CORSAIR GAMING RGB MOUSE SOFTWARE USER MANUAL
In the Corsair Utility Engine, in the Lighting menu,
1� Click New�
2� The Foreground Lighting Editor dialog box
appears� In the Name field, enter the name for
the lighting�
3� In the Notes field, enter any optional notes
you want to make about the lighting�
4� On the left side, click Gradient�
5� In the lighting grid, right-click and then click
Add�
6� A start marker appears at the 0% position�
In the lighting grid, right-click and then click
Add�
7� An end marker appears at the 100% position
and a color bar with two end markers appears
in the grid� You can add additional markers for
the gradient by repeating step 6� You can also
change the color of markers or move them to
change intensity and duration�
CHANGING A GRADIENT COLOR
1� In the lighting grid, right-click the marker you
want to change, and then click Edit�
CREATING A GRADIENT
LIGHTING EFFECT
2� The Select Color dialog box appears� Select
the color you want to use, and then click OK�
CHANGING INTENSITY AND DURATION
1� To adjust the intensity of the light, in the
lighting grid, click and drag the marker
vertically to raise or lower the intensity�
2� To adjust the duration, click and drag the
marker or marker to the time you want� You
cannot move a marker past another marker in
the lighting grid�
Note: In the lighting grid, the X-axis represents
the percentage of the total duration specified
in the End field� For example, if the End field
is set to 10 seconds, and you have created a
red light that starts at 4th mark on the X-axis
and goes to the 6th mark on the X-axis, when
the lighting effect activates, the red light will
start on the 4th second and last 2 seconds� If
you change the End field to 20 seconds, the
red light will start on the 8th second and last 4
seconds�
3� In the End field, type the number of seconds
you want the lighting effect to last� You can
set a maximum time of 99 seconds�
4� Click OK�
LIGHTING EFFECTS