P O W E R S U P P LY M A N U A L
P S U M A N UA L Congratulations on the purchase of your new Corsair power supply. This User Agreement (the “Agreement”) is a legal agreement between you (“You”), and Corsair Memory, Inc. (“Corsair”). You are agreeing to be bound by the terms of this agreement, as defined below, by using the Corsair power supply (“Product”). If you have any questions or concerns about the terms of this agreement, please contact us at http:// corsair.com.
P S U M A N UA L Obsolete or Discontinued Products Whenever possible, an obsolete or discontinued product will be replaced with the same product. If Corsair is unable to replace your obsolete or discontinued product with the same product, Corsair will replace that product with a new product of similar function and equal or greater value.
P S U M A N UA L Limitation of Liability CORSAIR SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS, REVENUE, OR DATA (WHETHER DIRECT OR INDIRECT) OR COMMERCIAL LOSS FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON YOUR PRODUCT EVEN IF CORSAIR HAS BEEN ADVISED PREVIOUSLY OF THE POSSIBILITY OF SUCH DAMAGES.
P S U M A N UA L Introduction Corsair power supplies are designed for worry-free compatibility for your desktop PC system build or upgrade. With the features to be expect from a premium power supply, it’s a great choice for systems where continuous and reliable power delivery and low noise are essential. Your Corsair power supply is packed with the latest technology and features: • CX750, CX750M, GS, TX, TX-M, GS, CS-M, HX, AX and AXi Series support the latest ATX12V2.
P S U M A N UA L Installation Before proceeding with installation, please read this manual in its entirety. Step A: Removing your existing power supply If you are building a new system, skip to Step B. 1. Disconnect the AC power cord from your wall outlet or UPS and from the existing power supply. 2. Disconnect all the power cables from your video card, motherboard and all other peripherals. 3. Follow the directions in your chassis manual and uninstall your existing power supply. 4. Proceed to Step B.
P S U M A N UA L Important safety information CAUTION ELECTRIC SHOCK HAZARD! 1. Install in accordance with all manufacturer instructions and safety warnings. Failure to do so may result in damage to your power supply or system, and may cause serious injury or death. 2. High voltages are present in the power supply. Do not open the power supply case or attempt to repair the power supply; there are no user-serviceable components. 3. This product is designed for indoor use only. 4.
