User Manual

ManualsBrandsCorsair ManualsCorsair PC Gaming ComponentsHydro Series, H100i PRO, 240mm Radiator, Dual 120mm PWM Fans, Advanced RGB Lighting and Fan Control with Software, Liquid CPU Cooler

LOW NOISE 240MM RGB LIQUID CPU COOLER

QUICK S TART GUIDE

EMAIL: support@corsair.com

FACEBOOK: facebook.com/corsair

BLOG: blog.corsair.com

FORUM: forum.corsair.com

TWITTER: twitter.com/corsair

USA and CANADA: (510) 657-8747 | INTERNATIONAL: (888) 222-4346 | FAX: (510) 657-8748

corsair.com

47100 BAYSIDE PARKWAY • FREMONT • CALIFORNIA • 94538 • USA

CORSAIR and the sails logo are registered trademarks in the United States

and/or other countries. All other trademarks are the property of their respective

owners. Product may vary slightly from those pictured. 49-001604 AC

H100i PRO

RGB

H100i PRO

RGB

Summary of content (12 pages)

PAGE 1
TM H100i PRO RGB corsair.com EMAIL: support@corsair.com FACEBOOK: facebook.com/corsair BLOG: blog.corsair.com 5 FORUM: forum.corsair.com TWITTER: twitter.com/corsair USA and CANADA: (510) 657-8747 | INTERNATIONAL: (888) 222-4346 | FAX: (510) 657-8748 © 2017 - 2018 CORSAIR COMPONENTS, INC. All rights reserved. CORSAIR and the sails logo are registered trademarks in the United States and/or other countries. All other trademarks are the property of their respective owners.
PAGE 2
Included Hardware Note: Most newer PC cases include a CPU cutout to allow access to the bottom of the motherboard. If your case does not include a cutout, you will need to remove your motherboard from the case before installation.
PAGE 3
1 Installing the Intel Backplate Installation de la plaque arrière Intel • Installation der Intel-Rückwand Instalación de la placa de soporte para Intel • Установка опорной пластины Intel 安装 Intel 背板 • For LGA 115X installation, slide the backplate pins inside (figure 1). • For LGA 1366 installation, slide the backplate pins outside (figure 1). • Install the assembled backplate (figure 2). Note: Intel LGA 2011 and LGA 2066 does not require backplate installation. Proceed to step 2.
PAGE 4
2 Installing the Intel Standoff Screws Installation des vis d'entretoise Intel • Installation der Intel-Abstandhalter Instalación de los tornillos del separador para Intel • Установка опорных винтов Intel 安装 Intel 隔架螺丝 LGA 115X/1366 B LGA2011/2011-3/ 2066 C 3 Install the Fans and Radiator Installation des ventilateurs et du radiateur • Lüfter und Kühler einbauen Instale los ventiladores y el radiador • Установка вентиляторов и радиатора 安装风扇和散热器 Attach the radiator and the fans as shown.
PAGE 5
4 Installing the Pump Unit Installation de la pompe • Montage der Pumpe • Instalación de la unidad de bomba Установка насоса • 安装泵机装置 • Align the bracket and pump over the standoff screws as shown. • Tighten the thumbs screws until all four corners are firmly secured. E • Alignez le support et la pompe sur les vis d'entretoises comme indiqué. • Serrez les vis moletées jusqu'à ce que les quatre coins soient bien fixés.
PAGE 6
Connect Pump to USB Header Included Hardware Branchement de la pompe à la fiche USB • Pumpe an USB-Header anschließen Enchufe el conector USB a la bomba • Подключение насоса к разъему USB 将泵机连接至 USB 接头 Highlighted parts for AMD installation only • Les sections en surbrillance concernent uniquement l'installation AMD • Die markierten Passagen beziehen sich nur auf die AMD Componentes de instalación solamente para Intel • Части, выделенные цветом, только для установки AMD 突出显示的部分仅限 AMD 安装 Using the inc
PAGE 7
1 Installing the AMD Mounting Bracket Installation du support de fixation AMD • Installation der AMD-Montagehalterung Instalación del soporte de montaje para AMD • Установка монтажного кронштейна AMD 安装 AMD 安装支架 Note: It is important that the AMD retention bracket be evenly secured on all sides before installation! • Remove the integrated Intel mounting bracket by turning the mounting bracket, and pulling away from the copper coldplate (figure 1).
PAGE 8
2 Install the Fans and Radiator Installation des ventilateurs et du radiateur • Lüfter und Kühler einbauen Instale los ventiladores y el radiador • Установка вентиляторов и радиатора 安装风扇和散热器 Attach the radiator and the fans as shown. For the best cooling performance, we recommend mounting the fans as an air-intake to your PC case. F Attachez le radiateur et les ventilateurs, comme illustré.
PAGE 9
3 Prepare the Mounting Bracket Préparation du support de fixation • Montagehalterung vorbereiten Prepare la placa de montaje • Подготовьте монтажный кронштейн • 准备安装支架 Insert the AMD screw clips and secure with the screws as shown. Do not tighten the thumb screws all the way. Insérez les clips AMD et fixez-les à l'aide des vis comme indiqué. Ne serrez pas les vis à fond.
PAGE 10
5 Connect Power to the Fans and Pump Branchement des ventilateurs et de la pompe à l'alimentation • Lüfter und Pumpe anschließen Conexión de la alimentación a los ventiladores y la bomba Подключение питания вентиляторови насоса • 连接风扇和泵机电源 • Connect pump power cable to an available SATA power plug (figure 1). • Connect pump tach cable to the CPU_FAN header on your motherboard (figure 1). • Connect each fan to the shrouded 4 pin connectors on the pump (figure 2).
PAGE 11
FAQ 1. How do I know the direction of the air flow of the fan? An arrow located on the side of the fan indicates the direction of air flow. 1. ¿Cómo puedo saber el sentido en que circula el aire del ventilador? En el lateral del ventilador hay una flecha que indica el sentido del flujo de aire. 2. Can I reuse the pre-applied thermal paste on the H100i PRO for a re-installation? Re-installation of the H100i PRO cooler will require you clean off the pre-applied thermal paste and apply an aftermarket paste.
PAGE 12
Thank you for purchasing the CORSAIR Hydro Series H100i PRO Low Noise Liquid CPU Cooler. Please visit: corsair.com to download a detailed user guide or to obtain technical support. Merci d'avoir acheté le dissipateur à liquide pour processeur hautes performances CORSAIR Hydro Series H100i PRO. Rendez-vous sur corsair.com pour télécharger un guide d'utilisation complet ou pour obtenir de l'assistance technique.