Installation Guide

ADHESIVE INSTALLATION (HEAVY FOOT TRAFFIC)
Be sure that the existing concrete bed was installed correctly with proper
expansion joints, and with a slope of at least 2% away from buildings or
foundations.
Use only highly deformable cement-based premium adhesives. Any adhesive
under this class (class C2S2) will allow for the proper expansion of the concrete
base below the pavers.
Be sure to use the double spreading method when applying the adhesive to both
the paver and the surface.
Leave a joint of at least 5mm between pavers. Fill the joints with cement-based
premium mortar (class CG2).
Do not install pavers directly over expansion joints in the concrete slab.
1
2
3
4
5
ADHESIVE INSTALLATION GUIDE
CLEANING AND MAINTENANCE
Use a common neutral detergent and a direct water jet for proper cleaning of the surface.
For a more intense cleaning be sure to use a brush or broom with soft nylon bristles.