Installation Guide
SAND INSTALLATION GUIDE
PRECAUTIONS TO BE TAKEN BEFORE ANY FORM OF INSTALLATION
PRELIMINARY INFORMATION
Always call before you dig. It is important to contact all telecommunication and utility
companies, in order to mark existing cables and pipes before excavation.
Always read instruction manual for any equipment before use, and adhere to all safety
instructions.
Always use proper safety equipment when installing porcelain pavers: e.g. gloves, safety
goggles, knee pads, and hearing protection.
When lifting product always use assistance, and proper lifting techniques.
Never use a plate compactor on porcelain pavers.
CUTTING PORCELAIN PAVERS
Always read instruction manual for any equipment before
use, and adhere to all safety instructions.
Due to the thickness and natural hardness of porcelain
pavers, they require a wet saw with at least 1.5 HP, and a
10” or 8” diamond blade. Take into consideration the length
of cut when choosing the appropriate saw for dierent
sized porcelain pavers. The length of cut should be at least
24”, or 38” for diagonal cuts.
Be aware that all cut porcelain edges will be very sharp;
handle with care.
CLEANING AND MAINTENANCE
Use a common neutral detergent and a direct water jet for proper cleaning of the surface.
For a more intense cleaning be sure to use a brush or broom with soft nylon bristles.