- CORTELCO Owner's MANUAL Telephone 1 4-Line Multi-User

Press * any time during your call to change to tone dialing mode. The

telephone is returned to pulse mode when you disconnect.

Tone/Pulse Mode

Depending on the phone service available in your area, you may need to

adjust the dialing mode.

NOTE: All 4 lines will be set to the same dialing mode.

Pulse Mode/Tone Mode

1. Press the PROGRAM key.

2. Press the up or down arrow key to scroll to the “Tone/Pulse” item.

3. Press the right arrow key to select this item.

4. Press the up or down arrow key to select Tone or Pulse dialing.

5. Press the right arrow key to confirm your selection.

Transfer

You may transfer an outside line to any extension on the system.

1. While on a outside line conversation, press .

2. Dial the extension you wish to transfer to, or press the desired Station

Select button (see Intercom - Predefined Station Select Buttons).

NOTE: If the call is transferred successfully, a single confirmation ring will

be heard. If the transfer is unsuccessful, a double ring will beeard,

and the call will be placed on hold.

Volume

Handset / Headset Volume

While on a conversation using the handset or headset, press the or

buttons to adjust the volume.

Ringer Volume

While your telephone is idle, press the or buttons to

adjust the ringer volume.

Speakerphone Volume

While on a speakerphone conversation, press the or

buttons to adjust the speakerphone volume.