OWNER’S INSTRUCTION MANUAL CALLER ID TYPE II MULTI-FEATURE TELEPHONE MODEL 2730 1
THANK YOU FOR PURCHASING THE 2730 CALLER ID TYPE II MULTI-FEATURE TELEPHONE We want you to know all about your new Telephone, how to install it, the features it provides, and the services you can expect from its use. We have included this information in your Owner’s Instruction Manual. PLEASE READ BEFORE INSTALLING AND USING YOUR NEW TELEPHONE EQUIPMENT.
Table Of Contents IMPORTANT SAFETY INSTRUCTIONS ................................ 5 TELEPHONE PART IDENTIFICATION ................................. 7 INSTALLATION .......................................................................... 8 DESK MOUNT ................................................................................................................. 8 WALL MOUNT ................................................................................................................. 8 ANSWERING MACHINE .
MESSAGE WAITING ..................................................................................................... 14 RINGER ........................................................................................................................... 15 RINGER CADENCE ....................................................................................................... 15 RINGER VOLUME .........................................................................................................
IMPORTANT SAFETY INSTRUCTIONS Always follow basic safety precautions when using your telephone equipment to reduce the risk of fire, electrical shock, and injury. 1. Read and understand all instructions in the Owner’s Instruction Manual. 2. Read all warnings and follow all instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners. 4. Do not use the telephone near water.
13. Do not use a telephone to report a gas leak in the vicinity of the leak. 14. Unplug the telephone from the wall outlet and refer servicing to qualified service personnel under the following conditions: • When the line cord is frayed or plugs damaged. • If liquid has been spilled into the telephone. • If the telephone has been exposed to rain or water. • If the telephone does not operate properly by following the operating instructions.
TELEPHONE PART IDENTIFICATION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Menu Button 5-7-10-11 Button Directory Button Save Button Message Lamp Multi-Angle LCD Delete Button Contrast Button Dial Button Voice Mail Button Review Up/Down Button Directory/Logo Strip 5 Auto Memory Buttons Shift Button Redial Button 16 17 18 19 20 21 22 23 24 25 26 27 28 29 7 Headset Jacks Flash Button Headset Button with LED Release Button Mute Button with LED Hold Button with LED Pause Button Speaker Button with LED Edit Button V
INSTALLATION DESK MOUNT 1. 2. 3. 4. Select the desired viewing angle and install the desk stand. The desk stand can be installed in two positions to give a choice of viewing angle. Connect the line cord. The line cord conncects to the jack marked LINE on the bottom of the phone.. Plug the coiled cord into the handset jack, and then plug the other end of the cord into the base. Place the handset on the base. WALL MOUNT 1. 2. 3. 4. Remove the desk stand.
UNIT SETUP FACTORY PRESETS The following table shows the default factory settings: LANGUAGE ....................................................................................................... ENGLISH STUTTER TONE .......................................................................................................... YES AREA CODE ...................................................................................................... No Setting LDS CODE ...................................................
8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. When [FLASH TIMER (MS)] appears, press REVIEW UP to toggle between 600ms, 100 ms, and 300ms. Press MENU to confirm selection. When [RINGER CADENCE] appears, the default setting is 3. To alter this setting, press REVIEW UP. There are 10 ringer cadences and each one will be played as you scroll through them. Press MENU to confirm selection. When [RINGER VOLUME] appears, the default setting is 3. To alter the ringer volume, press REVIEW UP.
TELEPHONE FEATURES DIALING The 2730 is only capable of DTMF dialing. It is not capable of pulse dialing. RECEIVING A PHONE CALL 1. 2. When the phone rings, lift the handset or press SPEAKER to begin your conversation. To change the Ringer Volume, refer to the “Factory Presets” section. PLACING A PHONE CALL 1. 2. Lift the handset or press the SPEAKER button and wait for a dial tone. Dial the telephone number you wish to call. The number will appear on the display window. PREDIAL 1. 2.
MUTE BUTTON Press MUTE to speak without the person on the phone hearing your conversation. The MUTE Indicator will light up and remain lighted until you resume your conversation. Also, “MIC MUTED” will show in the display. To resume the conversation, press MUTE. The MUTE indicator will go out and your call can continue. AUTOMATIC MEMORY Storing A Number 1. 2. 3. 4. 5. 6. 7. Press SAVE, [SAVE TO?] appears on the display window. Press the desired memory location.
1. 2. Press PAUSE and release at any point in the dialing sequence where a pause is desired. PAUSE can be pressed more than once to create a longer pause. HOLD BUTTON 1. NORMAL MODE a. b. 2. Press HOLD and hang up the handset. HOLD will light up and remain lighted until you resume your conversation. To resume your conversation, lift the handset or that of any extension phone on the same line or press and release SPEAKER. The HOLD indicator will go out and your call can continue. PBX MODE Press HOLD.
RELEASE BUTTON To end a conversation, press RELEASE once. There are two modes for RELEASE. 1. NEW CALL In NEW CALL mode, the phone goes on-hook for 1.5 seconds and then goes off hook again. This allows you to make another call. 2. HANG-UP In HANG UP mode, the phone does not come back off hook. This allows you to program a RELEASE into a speed dial location. VOICEMAIL BUTTON Press VOICEMAIL to dial the voicemail access number and pin. See Unit Setup section for details.
RINGER RINGER CADENCE The 2730 has 10 different ringer cadences. This makes it easy to distinguish a particular ringing phone from a group of phones. It can also be used to identify specific callers when used in conjunction with Caller ID. RINGER VOLUME The ringer volume can be adjusted over 4 different levels plus OFF.
CALLER ID FEATURES CALL WAITING DISPLAY Call-waiting service alerts you to a new call by playing a tone while you are on a call. Call Waiting Caller ID not only tells you there is another call waiting, but lets you know who the caller is before the call is answered. The name and number of the incoming call will be shown on the unit’s display. This infomation will remain displayed for 16 seconds. In addition to this, the CALL WAITING symbol (CW) will flash. RECEIVING CALLS 1. 2.
1. 2. If you have reviewed the calls with the telephone handset on hook, press DIAL. The HANDSET symbol in the display will come on, and the number you have selected will be dialed automatically via the speakerphone. If you have already picked up the handset or activated the speakerphone, you may select the number to be dialed by reviewing the stored calls. After locating the desired number, press DIAL. The displayed number will be dialed automatically.
• • When the telephone company is unable to provide the caller’s name, [UNKNOWN NAME] and his telephone number will be displayed on the screen. When the telephone company is unable to provide the caller’s name and number, [UNKNOWN CALLER] will be displayed on the screen. STORING A NUMBER FROM CALLER ID To store a number from Caller ID to a memory dial location follow these steps: 1. 2. 3. 4. 5. 6. 7. 8. Press REVIEW UP or REVIEW DOWN until the desired number is displayed.
USING THE DIRECTORY This unit can store the numbers of up to 99 contacts in the directory. Names are sorted alphabetically starting with the first character. (To sort the Directory by the last name, enter the last name first.) STORING ENTRIES Press SAVE to store a number in the Directory. After pressing SAVE, the display will show [Save To?]. Press DIRECTORY. [Enter Number>] will appear in the display. Enter the desired number using the keypad. (max 24 digits). Press SAVE to confirm.
TELEPHONE SERVICE PROBLEMS If you have any problems with your telephone service, determine if the problem is with your unit or the telephone company lines BEFORE CALLING THE TELEPHONE COMPANY. Be aware that the telephone company may charge you for a service call if the problem is caused by your telephone. Some common problems and suggested solutions are listed below. PHONE DOES NOT RING 1. 2. 3. Line cord is disconnected at telephone outlet or at telephone. Phone is OFF HOOK.
MAINTENANCE INFORMATION Treat your telephone equipment with care for trouble-free performance. Avoid dropping the handset. Carefully place the handset on-hook after use. Avoid putting near heating appliances and devices that generate electrical noise (for example, motors and florescent lamps). Clean your telephone equipment with a damp cloth. Stains may be removed with a mild soap. Do not use liquid or aerosol detergents or cleaning agents.
TELEPHONE REPAIR DO NOT ATTEMPT TO REPAIR THIS PRODUCT YOURSELF. Telephones manufactured by CORTELCO must be returned to us for repair. You can return your telephone to CORTELCO for repair or replacement in accordance with our LIMITED WARRANTY. CORTELCO warrants THIS PRODUCT against defects in material and workmanship in accordance with our LIMITED WARRANTY. If your telephone is returned for repair, include a copy of your sales receipt containing the date-of-purchase.
FCC INFORMATION Part 68 is a Federal regulation which requires equipment to be tested and registered with the FCC prior to its connection to the network. This equipment complies with Part 68 of FCC rules. On the bottom of the telephone is a label that contains, among other information, the FCC Registration Number and the Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this information to your telephone company.
LIMITED WARRANTY If you purchased this product new in the U.S. or Puerto Rico, CORTELCO warrants it against defects in material and workmanship for a period of two (2) years from the date of original purchase. This warranty is in lieu of all other express warranties. During the warranty period, CORTELCO agrees to repair or, at its option, replace the defective product, or any part of it without charge for parts or labor. This is your exclusive remedy.