Programming instructions

ROBOTC
VEX Cortex Conguration over USB • 2
© 2011 Carnegie Mellon Robotics Academy / For use with VEX Robotics Systems
2a. Connect the VEXnet Joystick
Use the USB A-to-A cable to connect your
VEXnet Joystick to your computer.
Note: The VEXnet light should turn green.
VEXnet Joystick Conguration in ROBOTC (cont.)
2. Connect the VEXnet Joystick to your computer using the USB A-to-A cable and turn it ON.
2b. Turn the VEXnet Joystick ON
Switch the VEXnet Joystick to the ON postion.
Note: The Joystick light should turn green.
Setup