SDS

US. ACGIH Threshold Limit Values
Value
Type
Form
Components
TWA 5 mg/m3 Inhalable fraction.Petrolatum (CAS
8009-03-8)
US. NIOSH: Pocket Guide to Chemical Hazards
Value
Type
Form
Components
STEL 10 mg/m3 Mist.Petrolatum (CAS
8009-03-8)
TWA 5 mg/m3 Mist.
STEL 10 mg/m3 Mist.White mineral oil (CAS
8042-47-5)
TWA 5 mg/m3 Mist.
No biological exposure limits noted for the ingredient(s).
Biological limit values
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Applies only to the product when used in an industrial setting. If contact is likely, safety glasses
with side shields are recommended.
Eye/face protection
Skin protection
Applies only to the product when used in an industrial setting. Wear appropriate chemical resistant
gloves. Suitable gloves can be recommended by the glove supplier.
Hand protection
Skin protection
Applies only to the product when used in an industrial setting. Use of an impervious apron is
recommended.
Other
Applies only to the product when used in an industrial setting. In case of insufficient ventilation,
wear suitable respiratory equipment.
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
Observe any medical surveillance requirements. Always observe good personal hygiene
measures, such as washing after handling the material and before eating, drinking, and/or
smoking. Routinely wash work clothing and protective equipment to remove contaminants.
General hygiene
considerations
9. Physical and chemical properties
Appearance
Semi-solid.
Physical state
Cream.
Form
White to off-white
Color
Characteristic.
Odor
Odor threshold
Not available.
pH
4 - 6.5
Melting point/freezing point
Not available.
Initial boiling point and boiling
range
212 °F (100 °C)
Flash point
> 200.0 °F (> 93.3 °C) Pensky-Martens Closed Cup
Evaporation rate
Not available.
Not available.
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
Not available.
Flammability limit - upper
(%)
Not available.
Explosive limit - lower (%)
Not available.
Explosive limit - upper (%)
Not available.
Cortizone-10 Creme SDS US
931648 Version #: 01 Revision date: - Issue date: 08-December-2015
3 / 7