Owner's manual

Photon Control Inc. ~ Making Light Work 11
3.5 Multi-fiber Cable Attachment
1. Remove the cap from the TFOL Connector Bulkhead.
2. Line up the connector grooves and thread the TFOL Connector onto the Bulkhead until tight.
Figure 10: Attaching the TFOL Multi-Fiber Connector
3.6 Heater Cable Attachment - Optional
1. Line up the four pins and connect the Heater Receptacle to Supply Cable
Figure 11: Optional Heater Connector
TFOL Connector
Bulkhead
TFOL Connecto
r
Heater Connector
Receptacle
NOTE:
Optional heated window for wet
processes.