Specifications

ManualsBrandsCosel ManualsConsumer electronicsPBA15F

INTRODUCTION

This Application Manual is produced for engineers who intend to design lighting items using the Stanley Slim

Stick S-Type LED Modules.

Through the use of this Application Manual, the lighting items can use their unique characteristics effectively.

Safety precautions and notes on the necessary quality conditions for design are described in this manual.

Before the LED lighting item is designed, be sure to read this manual thoroughly and understand the

functions of LED modules.

For performance and quality specifications of LED modules, refer to specifications (separately supplied).

SPECIAL FEATURES OF SLIM STICK S-TYPE LED MODULE

The Stanley Slim Stick S-Type is a unique brand-new LED illumination module which has the special

characteristics described below.

・ The thin and narrow stick shape of the LED module is applicable to illumination installed in the narrow spaces.

・ Emission color can be selected from either warm white or normal white.

・ Two LED configurations (15 or 30 LEDs) are available.

・ The LEDs are aligned in the same pitch.

・ By using a special connector supplied by BJB, LED modules can be joined and the joined LED module

emits the same pitch.

・ The LED module can operate on 12V DC power supply.

・ The LED luminous intensity and emission color dispersion are minimized by the regulation specified by

Stanley.

・ The Stanley LED Modules all conform to the RoHS Directive.

APPLICABLE LED MODULES

This Application Manual applies to the following Stanley Slim Stick S-Type.

MODEL

EMITTED COLOR

(COLOR TEMPERATURE)

NUMBER OF LEDS REMARKS

STW0101N Warm white (3,300K) 30 LEDs (10 mm pitch)

STW0201N Warm white (3,300K) 15 LEDs (20 mm pitch)

STN0101N White (5,000K) 30 LEDs (10 mm pitch)

STN0201N White (5,000K) 15 LEDs (20 mm pitch)

・ Direct LED emission can seriously damage the eyes. Never view a LED emission directly.

・ Never use a disassembled LED module.

・ A LED generates heat while it is emitting.

(The ambient temperature is increased by 20℃

℃℃

℃ by a 30 LED unit).

Pay attention to avoiding burns and to prevent deformation of the LED mount unit.

SLIM STICK S-TYPE LED MODULE

APPLICATIONS MANUAL

ARNING

Summary of content (7 pages)

PAGE 1
SLIM STICK S-TYPE LED MODULE APPLICATIONS MANUAL WARNING ・ Direct LED emission can seriously damage the eyes. Never view a LED emission directly. ・ Never use a disassembled LED module. ・ A LED generates heat while it is emitting. (The ambient temperature is increased by 20℃ ℃ by a 30 LED unit). Pay attention to avoiding burns and to prevent deformation of the LED mount unit.
PAGE 2
TABLE OF CONTENTS 1. CHARACTERISTICS AND VARIATIONS･････････････････････････････････････････････････････ 1 2. GENERAL VIEWS, NAMES, DESCRIPTIONS ･･･････････････････････････････････････････････ 2 3. INSTALLATION, CONNECTION ･････････････････････････････････････････････････････････････ 3 4. POWER SUPPLY REQUIREMENT･･･････････････････････････････････････････････････････････ 5 5. CAUTIONS ･･････････････････････････････････････････････････････････････････････････････････ 5 6.
PAGE 3
2.
PAGE 4
3. INSTALLATION, CONNECTION Two or more Slim Stick S LED modules can be installed by joining them with special couplers. A heat sink mounted LED module has superior reliability. ●Installation Procedure Offset : 0.7mm 30 LEDs (STW0101N, STN0101N) Guide hole 15 LEDs (STW0201N, STN0201N) Guide hole (1) Installation with screws Use M3 bolts (round head diameter < 0.7mm) for mounting LED module. The LED module is equipped with one guide hole. Use this hole for positioning the LED module.
PAGE 5
●Connecting Procedure The number of connector connections/disconnections must not exceed five. The connector has a projection for meshing with the LED module and guaranteeing polarity orientation. Insert the connector properly orientated until a click sounds informing complete insertion into the LED module.
PAGE 6
4. INSTALLATION, CONNECTION Use a DC12V constant voltage power supply. Stanley recommends the following power supply. The number of LED modules connected is limited by power supply capacity and LED module contact capacity. Model Recommended Power Supply Number of LED modules connected STW0201N, STN0201N COSEL PBA15F-12 8 (15 LEDs type) STW0101N, STN0101N COSEL PBA15F-12 5 (30 LEDs type) COSEL PBA30F-12 8 ＊The aforementioned recommended power supplies have sufficient safe performance.
PAGE 7
6.