User Manual
H710 Webcam User Manual V1.1
Thank you for choosing our newest webcam! This is a
product for real-time data transmission to PC via USB
port. It has a high resolution and fast transmission rate,
and it is also nice-looking and portable. This webcam
enables you to share happy moments online with your
family and friends!
①Omni directional electret microphone x 2
②Autofocus HD 1080P lens ③Privacy shutter
④Flexible Base / Clip
⑥Tripod Screw Hole ⑦USB Cable
⑧Fill light switch
⑤Scene fill light
⑨Automatic change RGB light
Product diagram
Parameters And Features
System Requirements
Install Your Webcam
Notice
Warranty
• 1080P CMOS color sensor
• Interface: USB2.0 port • Autofocus
• Frame rate: 30fps • Fov: 90°
• Aperture: F2.5 • Image focus: 8cm to infinity
• Privacy protection
• Omni directional electret microphone x 2
• Two gears Adjustable fill light
• Cable length: 1.7±0.02M
• Colourful mood working LED light,colour change by
random; glow only when image is displaying
• Multi-purpose mounting clip
• PC with a free USB port
• Operation system:
Windows XP SP2 and later
Linux 2.4.6 and later
Mac OS 10.5 and later
1. Do not use it in hot, cold, dusty or humid circumstances.
2. Avoid touching the lens with hands, sharp or coarse
stuff; please use clean and soft cloth for cleaning.
3. Avoid falling as much as possible. Severe falling may
cause damages to the lens, malfunction or scratches
to the surface.
1. This product is warranted by non-human factors.
What the warranty does not cover:
• Man-made damage.
• Repair or disassembled by other company's
technicians.
• Damage due to dropping or impact.
2. Any problems, you can contact the seller to get the
best solutions.
• Over 200MB available hard disk space.
• 32MB or higher memory
• Support Direct X VGA card
1. Place Your Webcam
Place the webcam where you want it - on a
computer display, desktop or a tripod.
2. Connect the Webcam
Connect the camera to the computer via the USB
interface.
Warm Tip: When using a desktop, it is better to
connect the webcam to the USB interface on the back
of the computer, The power supply is more stable.
3. When installation is finished, you can start using.
For Placement on the Display:
Open the webcam clip, and follow the steps and
methods show in the figure to place the webcam on
top of the display, please make sure the clip is firmly
mounted.
(Information contained herein is subject to change without notice.
Windows is a trademark of the Microsoft group of companies. Mac is
a trademark of Apple, Inc., registered in the U. S. and other countries.)
Note: this product does not contain tripod. Please purchase if necessary.
①
②
③ ⑨
④
⑤
⑥
⑧
⑦