User's Manual
Table Of Contents
- Table of contents
- Getting started
- Important notices
- Contraindications
- Environmental condition of use
- EMC
- Overview of the manual
- System overview
- Portable unit
- Bluetooth PC module (option)
- Battery charger and batteries
- Turbine flowmeter, optoelectronic reader and wind cover
- Face mask and head cap
- Optoelectronic reader and wind cover
- HR probe
- Oximeter (option)
- Pressure regulator for calibration (option)
- USB cable
- Earphones
- O2 sensor
- Power supply
- System warm-up
- Installation
- K5 Operation
- System maintenance
- Appendix
Connecting the K5 to the PC
K5 unit communicates with the PC via Bluetooth or via USB. Both connections can be used for real-time testing (laboratory mode) or for
downloading tests performed in telemetry or holter mode.
For a description of these modes, see the chapter K5 operation.
Note: The USB connection (to PC or any other USB devices) doesn’t charge the battery.
Bluetooth connection
To activate the Bluetooth connection, please enable the Bluetooth communication on the PC and associate the device with the PC.
USB connection
To connect the unit via USB connection, connect the USB cable between the standard USB port on the PC and the connector on the K5 unit.
Installation - Connecting the K5 to the PC- 37