y EASY TOUCH i A | CONTROL ] | raid 38 MS ULTRA-LOW LATENCY MECHANICAL FUTURISTIC 131] HIGH DEFINITION U0] 40 HOURS PLAYBACK TIME Le) LED LIGHTS
SPECIFICATIONS Bluetooth Version Low latency Driver size Frequency Response RN Music playtime Talk time Standby time Transmission Range Battery Earbuds Charging case Charging time Charging interface EERIE ET Tell] V5.3 38 ms under game mode iL] 20Hz-20Khz 98dB Up to 7 hours per charge C1 RTI hours per charge (at 50% volume) up to 7 hours 100 days 10m 40 mAh 400 mAh About 1.
HOW TO CHARGE THE COSMOSDB X200 e During use if the Red LED light on the TWS flashes with voice reminder "Battery Level Low", it indicates that the TWS battery level is low. e To charge place the earbuds into the charging case. e The Red LED on the earbuds will turn on indicating that the earbuds are charging. e Once the earbuds are charged the LED on it will turn off. To charge the case plug it to a 5V/1A charger using the included Type C Cable.
PAIRING THE X200 TO YOUR BLUETOOTH DEVICE FIRST TIME USER SMART POWER ON a. Once you remove the earbuds from the charging case, they will automatically enter pairing mode. b. Visit your mobile Bluetooth settings, New Device and connect to “CosmosDB X200” ¢. The CosmosDB X200 will automatically pair with your mobile and is ready IGT) B} MANUAL PAIRING MANUAL POWER ON a. Long touch on both the earbuds simultaneously until the LED lights on the earbuds start to flash. b.
USING SINGLE EARBUD ONLY Please note that both the earbuds can be used in mono mode. Step 1: Use either of the two options; Smart Power On or Manual Power On for switching on the desired earbud Step 2: The selected earbud will automatically enter the connection mode. Step 3: Turn on Bluetooth on your phone/media device and search for ‘Como Buds X200' to connect. MOTE: To switch to Stereo mode, simply take out the other earbud from the case.
MUSIC PLAYBACK MODE PREVIOUS TRACK: DOUBLE TOUCH THE LEFT EARBUDS. ll AE DOUBLE TOUCH THE RIGHT EARBUDS. SINGLE TOUCH ON EITHER EARBUD. [iid iH eRe TR SINGLE TOUCH ON EITHER EARBUD.
Triple Touch the LEFT earbud to activate your phone's default smart voice assistant.
FACTORY RESETTING THE COSMOSDB X200 Perform the Factory Reset in case you face any difficulty while operating your X200 Earbuds Note: Before performing reset, dear "CosmosDB X200" from paring device history by forgetting the TWS LONG PRESS BOTH EARBUDS Step 1: Unpaid the CosmosDB X200 from all your mobile devices before performing reset. Go to Bluetooth Settings and “Forget the Device” Step 2: Remove both the earbuds from the charging case. Step 3: Long Touch both the earbuds simultaneously for 5-6 seconds.
TROUBLESHOOT AUDIO ONLY FROM ONE EARBUD if you are unable to hear sound from any one earbud, it means that the earbuds are not connected with each other. The LED lights on the earbud not connected will blink continuously in BLUE and RED color.
POTENTIAL PROBLEM IF ONE EARBUD IS NOT WORKING Perform “TROUBLESHOOT AUDIO ONLY FROM ONE EARBUD” steps IF EARBUDS ARE UNABLE TO (oo) 1 [Se Perform the “FACTORY RESETTING THE COSMOSDB X200" & “TROUBLESHOOT AUDIO ONLY FROM ONE EARBUD"” both steps IF EARBUDS DISCONNECT DURING PHONE CALL Charge the earbuds or perform “FACTORY RESETTING THE COSMOSDB X200” go Teg gp ET 8 USAGE Place the earbuds back into the charging case and try using them again or perform “FACTORY RESETTING THE COSMOSDB X200"
WARNING « Please follow the instructions to operate. « Please charge the ear-buds with input power below 5V/1A in order to protect [EL CA « Please don’t use the ear-buds in extreme temperatures. « Please don't use the product near water. « Please keep the product away from heat sources, as the heat may damage it. « Don't jam the ports such as charger port, LED port, etc. « It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds’ service life.
HOW TO REMOVE VOLUME LIMIT ON ANDROID AND I0S TO INCREASE THE VOLUME iOS 1. Go to Settings > Music 2. Move the slider of Sound Check to the left to turn it off. THIS WILL REMOVE THE 105 VOLUME LIMIT SO THAT EARBUDS CAN PLAY AT FULL VOLUME.
ANDROID 1. Go to Settings > Bluetooth 2. Click on CosmosDB X200 3. In the options turn off option Sync Volume with phone NOTE: ABOVE OPTION MAY NOT BE AVAILABLE IN ALL ANDROID PHONES. DEPENDING ON THE PHONE MODEL AND MANUFACTURER.
LOR (lle) VR TRITE 311 Delphinium REMOVE SPOTTILY & AMAZON MUSIC VOLUME LIMIT.
SUPPORT DETAILS [iN 1800 31300 7700 (Mon-Fri 10am to 5PM) Email: FAQ: support.thecosmicbyte.com WARRANTY The CosmosDB X200 carries 1 Year warranty against manufacturing defects only. Physical, Water damage and Tampered products are not covered under warranty. Regular wear and tear from battery usage is not covered under warranty. Scan the OR code to know the Warranty Claim Procedure. support.thecosmicbyte.