User's Manual

- 16 -
5. ERRORS AND REMEDIAL MEASURES
5-1. In case the Feeding is not good
Thickness Dial
In case the feeding is not good, the gap of the Intake Slot
can be adjusted.
Step-1 Insert a coin (or a minus driver) to the Thickness Dial.
Step-2 Turn the Thickness Dial to adjust the gap.
5-2. In case of jamming
In case of jamming, following the guidance in the
Display, check the inside of the machine.
The covers can be open in order to clean inside or take
out jammed notes.
5-2-1 Feeding Ass’y
Hold and lift the Machine in the direction of the
arrow in the drawing and Feeding Ass’y can be
opened.