Full Product Manual

RECIRCULATING CHARCOAL FILTERS
Installing Recirculating Filters (For Ductless Model Only)
1. Remove the Baffle Filters
2. Locate the Motor
3. Place a Carbon Filter on one side of the motor and align with the clips.
4. Twist and Lock into Place.
5. Repeat steps 2-4 for the other side of the motor.
6. Place the Baffle Filters back into place.
Skip this page if you are installing a Ducted Range Hood.
Charcoal Filters are only included with Ductless Models
7.
Chimney Vent Holes located on the sides of the chimney must be exposed
to let the filtered air recirculate.
10